AS/NZS 60598.2.2:2001 Luminaires - Particular requirements - Recessed luminaires
- Abbreviation
- AS/NZS 60598.2.2:2001
- Amendment
- AA - incorporated. Published 28/07/2011.
- Valid from
- 28/11/2001
- Information provider
- Standards New Zealand
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard
- Format
- PDF, HARD COPY
Description
This part of the Standard specifies safety requirements for recessed luminaires for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltage not exceeding 1000 V. It does not apply to air handling or liquid cooling luminaires. This document is reproduced from IEC 60598.2.2:1996 including the IEC Amendment 1 and has been modified for Australian/New Zealand conditions.
Scope
This section of AS/NZS 60598.2 specifies requirements for recessed luminaires incorporating electric light sources for operation from supply voltages up to 1000 V. This section does not apply to air-handling or liquid-cooled luminaires.
This resource is cited by:
AS/NZS 60598.2.2:2001 Luminaires - Particular requirements - Recessed luminaires
This document is CITED BY:
-
C/AS1 (Amd 4) (First edition, amendment 4)
AS/NZS 60598.2.2:2001 is cited by Acceptable Solution C/AS1: Buildings with Sleeping (residential) and Outbuildings (Risk Group SH) from 10/09/2012
-
C/AS1 (Amd 3) (Amendment 3)
AS/NZS 60598.2.2:2001 is cited by Acceptable Solution C/AS1: Buildings with Sleeping (residential) and Outbuildings (Risk Group SH) from 10/09/2012
-
C/AS1 (Amd 2) (Amendment 2)
AS/NZS 60598.2.2:2001 is cited by Acceptable Solution C/AS1: Buildings with Sleeping (residential) and Outbuildings (Risk Group SH) from 10/09/2012
-
C/AS1 (Amd 1, Errata 1) (Amendment 1, Errata 1)
AS/NZS 60598.2.2:2001 is cited by Acceptable Solution C/AS1: Buildings with Sleeping (residential) and Outbuildings (Risk Group SH) from 10/09/2012
-
C/AS1 (1st Edition) (First Edition)
AS/NZS 60598.2.2:2001 is cited by Acceptable Solution C/AS1: Buildings with Sleeping (residential) and Outbuildings (Risk Group SH) from 10/09/2012
-
C/AS1 (Amd 5) (First Edition, Amendment 5)
AS/NZS 60598.2.2:2001 is cited by Acceptable Solution C/AS1: Buildings with Sleeping (residential) and Outbuildings (Risk Group SH) from 10/09/2012
-
C/AS2 (First Edition, Amd 1 (Errata 1) (First Edition, Amendment 1 (Errata1 - 22/10/2019))
AS/NZS 60598.2.2:2001 is cited by Acceptable Solution C/AS2: Buildings other than Risk Group SH from 27/06/2019 until 3/11/2021
-
C/AS2 (First edition, amendment 4)
AS/NZS 60598.2.2:2001 is cited by Acceptable Solution C/AS2: Buildings with Sleeping (non institutional) (Risk Group SM) from 10/04/2012
-
C/AS2 (Amendment 3)
AS/NZS 60598.2.2:2001 is cited by Acceptable Solution C/AS2: Buildings with Sleeping (non institutional) (Risk Group SM) from 10/04/2012
-
C/AS2 (Amendment 2)
AS/NZS 60598.2.2:2001 is cited by Acceptable Solution C/AS2: Buildings with Sleeping (non institutional) (Risk Group SM) from 10/04/2012
-
C/AS2 (Amendment 1, Errata 1)
AS/NZS 60598.2.2:2001 is cited by Acceptable Solution C/AS2: Buildings with Sleeping (non institutional) (Risk Group SM) from 10/04/2012
-
C/AS2 (First Edition)
AS/NZS 60598.2.2:2001 is cited by Acceptable Solution C/AS2: Buildings with Sleeping (non institutional) (Risk Group SM) from 10/04/2012
-
NZS 4246:2016
AS/NZS 60598.2.2:2001 is cited by NZS 4246:2016 Energy efficiency - Installing bulk thermal insulation in residential buildings - SPONSORED
This resource cites:
AS/NZS 60598.2.2:2001 Luminaires - Particular requirements - Recessed luminaires
This document CITES:
New Zealand Standards
-
AS/NZS 3000:2000
AS/NZS 60598.2.2:2001 cites AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules)
-
AS/NZS 60598.1:1998
AS/NZS 60598.2.2:2001 cites AS/NZS 60598.1:1998 Luminaires - Part 1: General requirements and tests
-
AS/NZS 60695.11.5:2005
AS/NZS 60598.2.2:2001 cites AS/NZS 60695.11.5:2005 Fire hazard testing. Part 11.5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
-
NZS 4246:2006
AS/NZS 60598.2.2:2001 cites NZS 4246:2006 Energy efficiency - Installing insulation in residential buildings - SPONSORED
Other
-
IEC 60227-1:1993
AS/NZS 60598.2.2:2001 cites IEC 60227-1:1993 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
-
IEC 60227-2:1997
AS/NZS 60598.2.2:2001 cites IEC 60227-2:1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
-
IEC 60227-3:1993+AMD1:1997 CSV
AS/NZS 60598.2.2:2001 cites IEC 60227-3:1993+AMD1:1997 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
-
IEC 60227-4:1992+AMD1:1997
AS/NZS 60598.2.2:2001 cites IEC 60227-4:1992+AMD1:1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
-
IEC 60227-5:1997
AS/NZS 60598.2.2:2001 cites IEC 60227-5:1997 +AMD1:1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
-
IEC 60227-6:2001
AS/NZS 60598.2.2:2001 cites IEC 60227-6:2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections
-
IEC 60227-7:1995
AS/NZS 60598.2.2:2001 cites IEC 60227-7:1995 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
-
IEC 60245-1:1994
AS/NZS 60598.2.2:2001 cites IEC 60245-1:1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
-
IEC 60245-2:1994
AS/NZS 60598.2.2:2001 cites IEC 60245-2:1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
-
IEC 60245-3:1994
AS/NZS 60598.2.2:2001 cites IEC 60245-3:1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
-
IEC 60245-4:1994
AS/NZS 60598.2.2:2001 cites IEC 60245-4:1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
-
IEC 60245-5:1994 (2nd Edition)
AS/NZS 60598.2.2:2001 cites IEC 60245-5:1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables
-
IEC 60245-6:1994
AS/NZS 60598.2.2:2001 cites IEC 60245-6:1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
-
IEC 60245-7:1994
AS/NZS 60598.2.2:2001 cites IEC 60245-7:1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
-
IEC 60245-8:1998
AS/NZS 60598.2.2:2001 cites IEC 60245-8:1998 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
-
IEC 60529:1989
AS/NZS 60598.2.2:2001 cites IEC 60529:1989 Degrees of protection provided by enclosures (IP Code)
-
IEC 60730-1:1999
AS/NZS 60598.2.2:2001 cites IEC 60730-1:1999 Automatic electrical controls for household and similar use - Part 1: General requirements
-
IEC 61032:1997 (2.0 b(1997))
AS/NZS 60598.2.2:2001 cites IEC 61032:1997 Protection of persons and equipment by enclosures - Probes for verification