AS/NZS 2269.0:2008 Plywood - Structural - Specifications
- Abbreviation
- AS/NZS 2269.0:2008
- Valid from
- 4/08/2008
- Replaces
- AS/NZS 2269:2004 ,
- Information provider
- Standards New Zealand,
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies requirements for the manufacture, grading, finishing and branding of structural plywood. Specifications for both stress and surface grades are also provided.
Scope
The Standard also specifies veneer quality, bond quality, standard lay-up construction, dimensional tolerances, joints, moisture content and characteristic strength and stiffness values for the nominated F-grades.
The following alternative methods for the determination of stress grades for structural plywood are also provided:
- a) Mechanical F-grading of the finished sheet of plywood;
- b) In-grade testing of finished plywood panels;
- c) In-grade testing of finished plywood panels.
Five surface grades, based on the veneer quality of the face and back veneers, A, S, B, C and D and one bond quality, Type A bond, are prescribed
This resource is cited by:
AS/NZS 2269.0:2008 Plywood - Structural - Specifications
This document is CITED BY:
-
E2/AS1 (Amd 7) (Third Edition, Amendment 7)
AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
E2/AS1 (Amd 6) (Third Edition, Amendment 6)
AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
E2/AS1 (Amd 5, Errata 2) (Third Edition, Amendment 5, Errata 2)
AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
E2/AS1 (Amd 5) (Third Edition, Amendment 5)
AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
E2/AS1 (Amd 8) (Third Edition, Amendment 8)
AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
E2/AS1 (Amd 9) (Third Edition, Amendment 9)
AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
E2/AS1 (Amd 10) (Third Edition, Amendment 10)
AS/NZS 2269.0:2008 is cited by Acceptable Solution E2/AS1: External Moisture from 1/08/2011
-
NZS 3604:2011
AS/NZS 2269.0:2008 is cited by NZS 3604:2011 Timber-framed buildings - SPONSORED
This resource cites:
AS/NZS 2269.0:2008 Plywood - Structural - Specifications
This document CITES:
AS/NZS 2269.0:2008 cites AS/NZS 1604.3:2002 Specification for preservative treatment - Plywood
AS/NZS 2269.0:2008 cites AS/NZS 2098.11:2005 (R2016) Methods of test for veneer and plywood - Part 11: Determination of formaldehyde emissions for plywood
AS/NZS 2269.0:2008 cites AS/NZS 2098.1:1996 Methods of test for veneer and plywood - Method 1: Moisture content of veneer and plywood
AS/NZS 2269.0:2008 cites AS/NZS 2098.2:1996 Methods of test for veneer and plywood - Method 2: Bond quality of plywood (chisel test)
AS/NZS 2269.0:2008 cites AS/NZS 2098.3:1996 Methods of test for veneer and plywood - Method 3: Bond quality and strength of scarf joints in plywood
AS/NZS 2269.0:2008 cites AS/NZS 2098.4:2006 (R2016) Methods of test for veneer and plywood - Part 4: Measurement of dimensions and shape for sheets of veneer and plywood
AS/NZS 2269.0:2008 cites AS/NZS 2269.1:2008 Plywood - Structural - Determination of structural properties - Test methods
AS/NZS 2269.0:2008 cites AS/NZS 2269.2:2007 Plywood - Structural - Determination of structural properties - Evaluation methods
AS/NZS 2269.0:2008 cites AS/NZS 2754.1(Int):2008 Adhesives for timber and timber products - Part 1: Adhesives for manufacture of plywood and laminated veneer lumber (LVL)
AS/NZS 2269.0:2008 cites AS/NZS 4063:1992 Timber - Stress-graded - In-grade strength and stiffness evaluation
AS/NZS 2269.0:2008 cites AS/NZS 4491:1997 (R2016) Timber - Glossary of terms in timber related Standards
AS/NZS 2269.0:2008 cites NZS 3603:1993 Timber structures standard
AS/NZS 2269.0:2008 cites AS 1720.1-1997 Timber structures - Part 1: Design methods