AS 2345-2006 (R2016) Dezincification resistance of copper alloys
- Abbreviation
- AS 2345-2006 (R2016)
- Valid from
- 13/06/2006
- Information provider
- Intertek Inform,
- Author
- Standards Australia
- Information type
- Australian Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies procedures for determining the resistance of copper-base alloys containing zinc dezincification.
Scope
This standard specifies procedures for determining the resistance of copper-base alloys containing zinc to the form of corrosion termed 'dezincification', in two steps as follows:
- (a) Alloys are categorized into two groups based on their chemical composition which is used to assess their susceptibility to dezincification.
- (b) Alloys assessed to be resistant to dezincification on the basis of chemical composition do not require testing. Alloys considered to be susceptible can be further evaluated by testing them under accelerated laboratory conditions after the completion of all manufacturing stages. Following this test and where the specified acceptance criteria are met, such alloys can also be regarded as resistant to dezincification.
This standard also specifies the acceptance criteria for the dezincification resistance of copper/zinc alloy components designed for use in contact with potable water or soils.
Note: Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in appendix A.
This resource is cited by:
AS 2345-2006 (R2016) Dezincification resistance of copper alloys
This document is CITED BY:
-
G12/AS1 (Amd 13) (Third Edition, Amendment 13)
AS 2345-2006 (R2016) is cited by Acceptable Solution G12/AS1: Water Supplies from 2/11/2023
-
G12/AS1 (Amd 14) (Third Edition, Amendment 14)
AS 2345-2006 (R2016) is cited by Acceptable Solution G12/AS1: Water Supplies from 2/11/2023
-
AS 1357.1-2009
AS 2345-2006 (R2016) is cited by AS 1357.1-2009 Valves primarily for use in heated water systems - Part 1: Protection valves
-
AS 1357.1:2019
AS 2345-2006 (R2016) is cited by AS 1357.1-2019 Valves primarily for use in heated water systems - Part 1: Protection valves
-
AS 3688:2016
AS 2345-2006 (R2016) is cited by AS 3688:2016 Water supply and gas systems - Metallic fittings and end connectors
-
AS 4032.1-2005
AS 2345-2006 (R2016) is cited by AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures - Part 1: Thermostatic mixing valves - Materials design and performance requirements
-
AS 4032.2-2005 (R2015)
AS 2345-2006 (R2016) is cited by AS 4032.2-2005 (R2015) Water supply - Valves for the control of hot water supply temperatures. Part 2: Tempering valves and end-of-line temperature-actuated devices
-
AS 4032.4:2014
AS 2345-2006 (R2016) is cited by AS 4032.4:2014 Water supply - Valves for the control of heated water supply temperatures. Part 4: Thermostatically controlled taps for the control of heated water supply temperatures
-
AS/NZS 2280:2014
AS 2345-2006 (R2016) is cited by AS/NZS 2280:2014 Ductile iron pipes and fittings
-
AS/NZS 2280:2020
AS 2345-2006 (R2016) is cited by AS/NZS 2280:2020 Ductile iron pipes and fittings
-
AS/NZS 2642.3:2008
AS 2345-2006 (R2016) is cited by AS/NZS 2642.3:2008 Polybutylene pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
-
AS/NZS 2845.1:2010
AS 2345-2006 (R2016) is cited by AS/NZS 2845.1:2010 Water supply - Backflow prevention devices - Part 1: Materials, design and performance requirements
-
AS/NZS 2845.1:2022
AS 2345-2006 (R2016) is cited by AS/NZS 2845.1:2022 Water supply - Backflow prevention devices - Part 1: Materials, design and performance requirements
-
AS/NZS 3666.1:2011
AS 2345-2006 (R2016) is cited by AS/NZS 3666.1:2011 Air-handling and water systems of buildings - Microbial Control - Design, installation and commissioning
-
AS/NZS 4129:2008
AS 2345-2006 (R2016) is cited by AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications
-
AS/NZS 4129:2020
AS 2345-2006 (R2016) is cited by AS/NZS 4129:2020 Fittings for polyethylene (PE) pipes for pressure applications
This resource cites:
AS 2345-2006 (R2016) Dezincification resistance of copper alloys
This document CITES:
AS 2345-2006 (R2016) cites AS/NZS 1567:1997 Copper and copper alloys - Wrought rods, bars and sections
AS 2345-2006 (R2016) cites AS 1565-1996 Copper and copper alloys - Ingots and castings
AS 2345-2006 (R2016) cites AS 1566-1997 (R2018) Copper and copper alloys - Rolled flat products
AS 2345-2006 (R2016) cites AS 2738-2000 (R2018) Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings
AS 2345-2006 (R2016) cites MP 52-2005 Manual of authorization procedures for plumbing and drainage products