AS 1834.1-1991 (R2018) Material for soldering - Part 1: Solder alloys
- Abbreviation
- AS 1834.1-1991
- Valid from
- 13/05/1991
- Information provider
- Intertek Inform
- Author
- Standards Australia
- Information type
- Australian Standard
- Format
- PDF, HARD COPY
Description
This Standard specifies requirements for chemical composition and gives properties and typical applications for tin-lead and other tin-containing solder alloys.
Scope
This Standard specifies the chemical composition requirements for tin-lead and other tin-containing solder alloys supplied in the cast, wrought, paste, or powder form. It is not applicable to working solder baths which may be subject to other impurity requirements.
Notes:
- For the purpose of this Standard, 'wrought' includes ribbon, wire, rod and preforms.
- Advice and recommendations on information to be supplied by the purchaser at the time of enquiry and order are contained in Appendix A.
- Typical properties and uses of solders specified in this Standard are given in Appendix B.
- The contaminant limits for working solder baths used for the soldering of printed board assemblies are given in AS 3508.1.
This resource is cited by:
AS 1834.1-1991 (R2018) Material for soldering - Part 1: Solder alloys
This document is CITED BY:
-
AS 1357.1-2009
AS 1834.1-1991 is cited by AS 1357.1-2009 Valves primarily for use in heated water systems - Part 1: Protection valves
-
AS 1357.1:2019
AS 1834.1-1991 is cited by AS 1357.1-2019 Valves primarily for use in heated water systems - Part 1: Protection valves
-
AS 1357.2-2005
AS 1834.1-1991 is cited by AS 1357.2-2005 (2015) Valves primarily for use in heated water systems. Part 2: Control valves
-
AS 3688-2005
AS 1834.1-1991 is cited by AS 3688-2005 Water supply - Metallic fittings and end connectors
-
AS 3688:2016
AS 1834.1-1991 is cited by AS 3688:2016 Water supply and gas systems - Metallic fittings and end connectors
-
AS 4032.1-2005
AS 1834.1-1991 is cited by AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures - Part 1: Thermostatic mixing valves - Materials design and performance requirements
-
AS 4032.2-2005 (R2015)
AS 1834.1-1991 is cited by AS 4032.2-2005 (R2015) Water supply - Valves for the control of hot water supply temperatures. Part 2: Tempering valves and end-of-line temperature-actuated devices
-
AS 4032.4:2014
AS 1834.1-1991 is cited by AS 4032.4:2014 Water supply - Valves for the control of heated water supply temperatures. Part 4: Thermostatically controlled taps for the control of heated water supply temperatures
-
AS/NZS 2845.1:2010
AS 1834.1-1991 is cited by AS/NZS 2845.1:2010 Water supply - Backflow prevention devices - Part 1: Materials, design and performance requirements
-
AS/NZS 2845.1:2022
AS 1834.1-1991 is cited by AS/NZS 2845.1:2022 Water supply - Backflow prevention devices - Part 1: Materials, design and performance requirements
-
AS/NZS 3500.3:2018
AS 1834.1-1991 is cited by AS/NZS 3500.3:2018 Plumbing and drainage Part 3: Stormwater drainage
-
AS/NZS 3500.3:2021
AS 1834.1-1991 is cited by AS/NZS 3500.3:2021 Plumbing and drainage, Part 3: Stormwater drainage