BS EN 12285-1:2003 Workshop fabricated steel tanks - Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
- Abbreviation
- BS EN 12285-1:2003
- Valid from
- 6/08/2003
- Information provider
- Standards New Zealand,
- Author
- British Standards Institution
- Information type
- British Standard,
Description
BS EN 12285-1:2003 specifies the requirements for shop fabricated cylindrical, horizontal steel tanks, single and double skin for the underground storage of water polluting liquids (both flammable and non-flammable) within the following limits:
- from 800 mm up to 3,000 mm nominal diameter
- up to a maximum overall length of 6 times the nominal diameter
- for liquids with a maximum density of up to 1.9 kg/l and with an operating pressure of maximum 1.5 bar (abs.)
- for double skin tanks with a vacuum leak detection system where the kinematic viscosity does not exceed 5 x 10-3 m2/s.
This standard is applicable for normal operating temperature conditions (-20 degrees C to +50 degrees C). Where temperatures are outside of this range, additional requirements should be taken into account.
This resource is cited by:
BS EN 12285-1:2003 Workshop fabricated steel tanks - Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
This document is CITED BY:
-
G14/VM1 (Amd 6) (Second Edition, Amendment 6)
BS EN 12285-1:2003 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 30/09/2010
-
G14/VM1 (Amd 5) (Second Edition, Amendment 5)
BS EN 12285-1:2003 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 30/09/2010
-
G14/VM1 (Second Edition, Amendment 4)
BS EN 12285-1:2003 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 30/09/2010
-
G14/VM1 (Amd 3) (Second Edition, Amendment 3)
BS EN 12285-1:2003 is cited by Verification Method G14/VM1: Industrial Liquid Waste from 30/09/2010
-
BS EN 12285-2:2005
BS EN 12285-1:2003 is cited by BS EN 12285-2:2005 Workshop fabricated steel tanks - Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
This resource cites:
BS EN 12285-1:2003 Workshop fabricated steel tanks - Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
This document CITES:
BS EN 12285-1:2003 cites BS EN 10025:1993 Hot rolled products of non-alloy structural steels. Technical delivery conditions
BS EN 12285-1:2003 cites BS EN 10051:1991+A1:1997 Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels. Tolerances on dimensions and shape
BS EN 12285-1:2003 cites BS EN 10204:1991 Metallic products. Types of inspection documents
BS EN 12285-1:2003 cites BS EN 13160-1:2003 Leak detection systems - Part 1: General principles
BS EN 12285-1:2003 cites BS EN 13160-2:2003 Leak detection systems - Part 2: Pressure and vacuum systems
BS EN 12285-1:2003 cites BS EN 13160-3:2003 Leak detection systems - Part 3: Liquid systems for tanks
BS EN 12285-1:2003 cites BS EN 13160-4:2003 Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
BS EN 12285-1:2003 cites BS EN 13160-5:2004 Leak detection systems - Part 5: Tank gauge leak detection systems
BS EN 12285-1:2003 cites BS EN 13160-6:2003 Leak detection systems - Part 6: Sensors in monitoring wells
BS EN 12285-1:2003 cites BS EN 13160-7:2003 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
BS EN 12285-1:2003 cites BS EN 287-1:1992 Approval testing of welders for fusion welding. Steels
BS EN 12285-1:2003 cites BS EN 288-1:1992 Specification and approval of welding procedures for metallic materials - Part 1: General rules for fusion welding
BS EN 12285-1:2003 cites BS EN 288-2:1992 Specification and approval of welding procedures for metallic materials - Part 2: Welding procedures specification for arc welding
BS EN 12285-1:2003 cites BS EN 288-3:1992 Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steels
BS EN 12285-1:2003 cites ISO 8501-1:1988 Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
BS EN 12285-1:2003 cites ISO 898-1:1999 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs