AS/NZS 4455:1997 Masonry units and segmental pavers
- Abbreviation
- AS/NZS 4455:1997
- Valid from
- 4/03/1997
- Replaces
- AS 3102-1983 ,
- Information provider
- Standards New Zealand
- Author
- Standards New Zealand, Standards Australia
- Information type
- New Zealand Standard
- Format
Description
This StandARD Specifies requirements for commercially manufactured segmental pavers of up to 0.1 sqm face area and masonry units for walling. It includes masonry units and segmental pavers made from autoclaved aerated concrete, calcium, silicate, concrete, dimension stone and fired clay. Cited in the Ministry's Simple House Acceptable Solution
Scope
This Standard specifies requirements for the verification of nominated characteristic values of commercially manufactured masonry units for walling and segmental pavers of up to 0.1 m2 face area. The masonry units and segmental pavers include those made of the following materials:
- a) Autoclaved aerated concrete;
- b) Calcium silicate (sand-lime);
- c) Concrete (dense or lightweight);
- d) Dimension stone (cut or dressed); and
- e) Fired clay (with or without shale).
There are non-rectilinear shapes for walling and paving that are not illustrated in this Standard nevertheless, these are covered by this Standard with the provision that not all test methods mentioned may be applicable to such shapes.
Tiles that are intended to be rigidly fixed or suspended are not included in this Standard. Dimension stone has a wide variety of characteristics; these are not fully covered by the requirements of this Standard. The referenced test methods may require modifications for stone.
This resource is cited by:
AS/NZS 4455:1997 Masonry units and segmental pavers
This document is CITED BY:
-
AS/NZS 2699.1:2000
AS/NZS 4455:1997 is cited by AS/NZS 2699.1:2000 Built-in components for masonry construction - Wall ties
-
AS/NZS 2699.2:2000
AS/NZS 4455:1997 is cited by AS/NZS 2699.2:2000 Built-in components for masonry construction - Connectors and accessories
-
NZS 3116:2002
AS/NZS 4455:1997 is cited by NZS 3116:2002 Concrete segmental and flagstone paving
-
NZS 4210:2001
AS/NZS 4455:1997 is cited by NZS 4210:2001 Code of practice for masonry construction: materials and workmanship
-
NZS 4230:2004
AS/NZS 4455:1997 is cited by NZS 4230:2004 Design of reinforced concrete masonry structures
-
SH/AS1 (First edition, unamended)
AS/NZS 4455:1997 is cited by Simple House - Acceptable Solution Revoked
-
NZS HB 4236:2002
AS/NZS 4455:1997 is cited by SNZ HB 4236:2002 Masonry veneer wall cladding
This resource cites:
AS/NZS 4455:1997 Masonry units and segmental pavers
This document CITES:
New Zealand Standards
-
AS/NZS 3661.1:1993
AS/NZS 4455:1997 cites AS/NZS 3661.1:1993 Slip resistance of pedestrian surfaces - Requirements
-
AS/NZS 4456.10:1997
AS/NZS 4455:1997 cites AS/NZS 4456.10:1997 Masonry units and segmental pavers - Methods of test - Determining resistance to salt attack
-
AS/NZS 4456.11:1997
AS/NZS 4455:1997 cites AS/NZS 4456.11:1997 Masonry units and segmental pavers - Methods of test - Determining coefficients of expansion
-
AS/NZS 4456.12:1997
AS/NZS 4455:1997 cites AS/NZS 4456.12:1997 Masonry units and segmental pavers - Methods of test - Determining coefficients of contraction
-
AS/NZS 4456.13:1997
AS/NZS 4455:1997 cites AS/NZS 4456.13:1997 Masonry units and segmental pavers - Methods of test - Determining pitting due to lime particles
-
AS/NZS 4456.14:1997
AS/NZS 4455:1997 cites AS/NZS 4456.14:1997 Masonry units and segmental pavers - Methods of test - Determining water absorption properties
-
AS/NZS 4456.15:1997
AS/NZS 4455:1997 cites AS/NZS 4456.15:1997 Masonry units and segmental pavers - Methods of test - Determining lateral modulus of rupture
-
AS/NZS 4456.16:1997
AS/NZS 4455:1997 cites AS/NZS 4456.16:1997 Masonry units and segmental pavers - Methods of test - Determining permeability to water
-
AS/NZS 4456.17:1997
AS/NZS 4455:1997 cites AS/NZS 4456.17:1997 Masonry units and segmental pavers - Methods of test - Determining initial rate of absorption (suction)
-
AS/NZS 4456.18:1997
AS/NZS 4455:1997 cites AS/NZS 4456.18:1997 Masonry units and segmental pavers - Methods of test - Determining tensile strength of masonry units and segmental pavers
-
AS/NZS 4456.1:1997
AS/NZS 4455:1997 cites AS/NZS 4456.1:1997 Masonry units and segmental pavers - Methods of test - Sampling for compliance testing
-
AS/NZS 4456.2:1997
AS/NZS 4455:1997 cites AS/NZS 4456.2:1997 Masonry units and segmental pavers - Methods of test - Assessment of mean and standard deviation
-
AS/NZS 4456.3:1997
AS/NZS 4455:1997 cites AS/NZS 4456.3:1997 Masonry units and segmental pavers - Methods of test - Determining dimensions
-
AS/NZS 4456.4:1997
AS/NZS 4455:1997 cites AS/NZS 4456.4:1997 Masonry units and segmental pavers - Methods of test - Determining compressive strength of masonry units
-
AS/NZS 4456.5:1997
AS/NZS 4455:1997 cites AS/NZS 4456.5:1997 Masonry units and segmental pavers - Methods of test - Determining breaking load of segmental paving units
-
AS/NZS 4456.6:1997
AS/NZS 4455:1997 cites AS/NZS 4456.6:1997 Masonry units and segmental pavers - Methods of test - Determining potential to effloresce
-
AS/NZS 4456.7:1997
AS/NZS 4455:1997 cites AS/NZS 4456.7:1997 Masonry units and segmental pavers - Methods of test - Determining core percentage and material thickness
-
AS/NZS 4456.8:1997
AS/NZS 4455:1997 cites AS/NZS 4456.8:1997 Masonry units and segmental pavers - Methods of test - Determining moisture content and dry density
-
AS/NZS 4456.9:1997
AS/NZS 4455:1997 cites AS/NZS 4456.9:1997 Masonry units and segmental pavers - Methods of test - Determining abrasion resistance
Australian Standards
-
AS 1199-1988
AS/NZS 4455:1997 cites AS 1199-1988 Sampling procedures and tables for inspection by attributes
-
AS 1399-1990
AS/NZS 4455:1997 cites AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
-
AS 3700-1988
AS/NZS 4455:1997 cites AS 3700-1988 Masonry structures (known as the SAA Masonry Code)