AS 1579-2001 (R2018) Arc welded steel pipes and fittings for water and waste water
- Abbreviation
- AS 1579-2001
- Valid from
- 12/07/2001
- Information provider
- SAI Global
- Author
- Standards Australia
- Information type
- Australian Standard
- Format
Description
This Standard specifies requirements for arc welded steel pipes and fittings, with butt-welded seams, having diameters equal to or greater than 100 mm nominal size (DN 100), intended for the conveyance of water and waste water at pressures up to 6.8 MPa, and for use as piles.
Scope
Methods of demonstrating compliance with this Standard are given in Appendix A.
NOTE: Purchasing guidelines are given in Appendix B.
This resource is cited by:
AS 1579-2001 (R2018) Arc welded steel pipes and fittings for water and waste water
This document is CITED BY:
-
E1/AS1 (First Edition, Amendment 11.)
AS 1579-2001 is cited by Acceptable Solution E1/AS1: Surface Water from 30/09/2010
-
E1/AS1 (First Edition, Amendment 9)
AS 1579-2001 is cited by Acceptable Solution E1/AS1: Surface Water from 30/09/2010
-
E1/AS1 (First Edition, Amendment 8)
AS 1579-2001 is cited by Acceptable Solution E1/AS1: Surface Water from 30/09/2010
-
E1/AS1 (First Edition, Amendment 10)
AS 1579-2001 is cited by Acceptable Solution E1/AS1: Surface Water from 30/09/2010
-
G13/AS2 (Second Edition, Amendment 7)
AS 1579-2001 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
G13/AS2 (Second Edition, Amendment 3)
AS 1579-2001 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
G13/AS2 (Second Edition, Amendment 5)
AS 1579-2001 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
G13/AS2 (Second Edition, Amendment 9)
AS 1579-2001 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
G13/AS2 (Second Edition, Amendment 8)
AS 1579-2001 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
G13/AS2 (Second Edition, Amendment 4)
AS 1579-2001 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
G13/AS2 (Second Edition, Amendment 6)
AS 1579-2001 is cited by Acceptable Solution G13/AS2: Drainage from 30/09/2010
-
AS 1646-2007
AS 1579-2001 is cited by AS 1646-2007 (R2018) Elastomeric seals for waterworks purposes
-
AS/NZS 2327:2017
AS 1579-2001 is cited by AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings
This resource cites:
AS 1579-2001 (R2018) Arc welded steel pipes and fittings for water and waste water
This document CITES:
New Zealand Standards
-
AS/NZS 1554.1:2000
AS 1579-2001 cites AS/NZS 1554.1:2000 Structural steel welding - Part 1: Welding of steel structures
-
AS/NZS 1594:1997
AS 1579-2001 cites AS/NZS 1594:1997 Hot-rolled steel flat products
-
AS/NZS 3500.0:1995
AS 1579-2001 cites AS/NZS 3500.0:1995 Plumbing and drainage - Glossary of terms
-
AS/NZS 3678:1996
AS 1579-2001 cites AS/NZS 3678:1996 Structural steel - Hot-rolled plates, floorplates and slabs
-
AS/NZS 4020:1999
AS 1579-2001 cites AS/NZS 4020:1999 Products for use in contact with drinking water
-
SANZ/SAA HB 18.28:1991
AS 1579-2001 cites SANZ/SAA HB 18.28:1991 Guidelines for third-party certification and accreditation - Guide 28 - General rules for a model third-party certification system for products
Australian Standards
-
AS 1199-1988
AS 1579-2001 cites AS 1199-1988 Sampling procedures and tables for inspection by attributes
-
AS 1281-2001
AS 1579-2001 cites AS 1281-2001 (2018) Cement mortar lining of steel pipes and fittings
-
AS 1349-1986
AS 1579-2001 cites AS 1349-1986 (R2018) Bourdon tube pressure and vacuum gauges
-
AS 1646.1-2000
AS 1579-2001 cites AS 1646.1-2000 Elastomeric seals for waterworks purposes - General requirements
-
AS 1646.2-2000
AS 1579-2001 cites AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation
-
AS 1646.3-2000
AS 1579-2001 cites AS 1646.3-2000 Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
-
AS 1978-1987
AS 1579-2001 cites AS 1978-1987 Pipelines - Gas and liquid petroleum - Field pressure testing (known as the SAA Code for Field Pressure Testing of Pipelines)
-
AS 2812-1985
AS 1579-2001 cites AS 2812-1985 Welding, brazing and cutting of metals - Glossary of terms
-
AS 4087-1996
AS 1579-2001 cites AS 4087-1996 Metallic flanges for waterworks purposes
-
AS 4321-2001
AS 1579-2001 cites AS 4321-2001(R2019) Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings
Other
-
API Spec 5L-2000 (2001) (42nd Edition)
AS 1579-2001 cites API Spec 5L-2000 (2001) Specification for Line Pipe
-
ISO 2859-1:1999
AS 1579-2001 cites ISO 2859-1:1999 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
-
ISO 3951:1989
AS 1579-2001 cites ISO 3951:1989 Sampling procedures and charts for inspection by variables for percent nonconforming