Save

BS EN 12285-1:2003 Workshop fabricated steel tanks - Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids

Abbreviation
BS EN 12285-1:2003
Valid from
06/08/2003

Information provider
Standards New Zealand
Author
British Standards Institution
Information type
British Standard
Format
PDF


Description

BS EN 12285-1:2003 specifies the requirements for shop fabricated cylindrical, horizontal steel tanks, single and double skin for the underground storage of water polluting liquids (both flammable and non-flammable) within the following limits:

  • from 800 mm up to 3,000 mm nominal diameter
  • up to a maximum overall length of 6 times the nominal diameter
  • for liquids with a maximum density of up to 1.9 kg/l and with an operating pressure of maximum 1.5 bar (abs.)
  • for double skin tanks with a vacuum leak detection system where the kinematic viscosity does not exceed 5 x 10-3 m2/s.

This standard is applicable for normal operating temperature conditions (-20 degrees C to +50 degrees C). Where temperatures are outside of this range, additional requirements should be taken into account.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

BS EN 12285-1:2003 Workshop fabricated steel tanks - Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids

This document is CITED BY:

BS EN 12285-1:2003 Workshop fabricated steel tanks - Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids

Description

BS EN 12285-1:2003 specifies the requirements for shop fabricated cylindrical, horizontal steel tanks, single and double skin for the underground storage of water polluting liquids (both flammable and non-flammable) within the following limits:

  • from 800 mm up to 3,000 mm nominal diameter
  • up to a maximum overall length of 6 times the nominal diameter
  • for liquids with a maximum density of up to 1.9 kg/l and with an operating pressure of maximum 1.5 bar (abs.)
  • for double skin tanks with a vacuum leak detection system where the kinematic viscosity does not exceed 5 x 10-3 m2/s.

This standard is applicable for normal operating temperature conditions (-20 degrees C to +50 degrees C). Where temperatures are outside of this range, additional requirements should be taken into account.

View on Information Provider website
BS EN 12285-1:2003 Workshop fabricated steel tanks - Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
Description

BS EN 12285-1:2003 specifies the requirements for shop fabricated cylindrical, horizontal steel tanks, single and double skin for the underground storage of water polluting liquids (both flammable and non-flammable) within the following limits:

  • from 800 mm up to 3,000 mm nominal diameter
  • up to a maximum overall length of 6 times the nominal diameter
  • for liquids with a maximum density of up to 1.9 kg/l and with an operating pressure of maximum 1.5 bar (abs.)
  • for double skin tanks with a vacuum leak detection system where the kinematic viscosity does not exceed 5 x 10-3 m2/s.

This standard is applicable for normal operating temperature conditions (-20 degrees C to +50 degrees C). Where temperatures are outside of this range, additional requirements should be taken into account.

View on Information Provider website
This resource cites:

BS EN 12285-1:2003 Workshop fabricated steel tanks - Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids

This document CITES:
Other
Save
Feedback