ISO 1172:1996 - Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods
- Abbreviation
- ISO 1172:1996
- Valid from
- 26/12/1996
- Information provider
- Standards New Zealand,
- Author
- International Organization for Standardization
- Information type
- ISO Standard,
- Format
- PDF, HARD COPY,
Description
This International standard specifies two calcination methods for the determination of the textile-glass and mineral-filler content of glass-reinforced plastics:
- Method A: for the determination of the textile-glass content when no mineral fillers are present.
- Method B: for the determination of the textile-glass and mineral-filler content when both components are present.
Scope
This International standard is applicable to the following types of material: prepregs made from yarns, rovings, tapes or fabrics;
- SMC, BMC and DMC moulding compounds;
- textile-glass-reinforced thermoplastic moulding materials and granules;
- filled or unfilled textile-glass laminates made with thermosetting or thermoplastic resins.
The methods are not applicable to the following types of reinforced plastic:
- those containing reinforcements other than textile glass;
- those containing materials which do not completely burn off at the test temperature (for example, those based on silicone resin);
- those containing mineral fillers which degrade at temperatures below the minimum calcination temperature.
For these materials, ISO 11667, fibre-reinforced plastics moulding compounds and prepregs determination of resin, reinforcement-fibre and mineral-filler content dissolution method, may be used.
This resource is cited by:
ISO 1172:1996 - Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods
This document is CITED BY:
-
AS/NZS 1546.1:2008
ISO 1172:1996 is cited by AS/NZS 1546.1:2008 On-site domestic wastewater treatment units: Septic tanks
-
BS EN 13121-3:2008
ISO 1172:1996 is cited by BS EN 13121-3:2008 GRP tanks and vessels for use above ground. Design and workmanship