BS EN 81-20:2014 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Part 20: Passenger and goods passenger lifts
- Abbreviation
- BS EN 81-20:2014
- Valid from
- 31/08/2014
- Information provider
- Standards New Zealand,
- Author
- European Standardization Organisations, British Standards Institution
- Information type
- European Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies the safety rules for permanently installed new passenger or goods passenger lifts. It covers lifts with traction, positive or hydraulic drive, serving defined landing levels, having a car designed for the transportation of people or people and goods, suspended by ropes or chains or jacks and moving between guide rails inclined not more than 15° to the vertical.
Scope
This Standard does not cover:
- a) lifts with:
- 1) drive systems other than those stated in the description above;
- 2) rated speed ≤ 0,15 m/s;
- b) hydraulic lifts:
- 1) with a rated speed exceeding 1 m/s;
- 2) where the setting of the pressure relief valve exceeds 50 MPa;
- c) new passenger or goods passenger lifts in existing buildings where in some circumstances due to limitations enforced by building constraints, some requirements of EN 81-20 cannot be met and EN 81-21 should be considered;
- d) lifting appliances, such as paternosters, mine lifts, theatrical lifts, appliances with automatic caging, skips, lifts and hoists for building and public works sites, ships' hoists, platforms for exploration or drilling at sea, construction and maintenance appliances or lifts in wind turbines;
- e) important modifications (see Annex C) to a lift installed before this Standard is brought into application;
- f) safety during operations of transport, erection, repairs, and dismantling of lifts.
However, this Standard may usefully be taken as a basis. Noise and vibrations are not dealt with in this Standard as they are not found at levels which could be considered as harmful with regard to the safe use and maintenance of the lift.
This Standard is not applicable to passenger and goods passenger lifts, which are installed before the date of its publication.
This resource is cited by:
BS EN 81-20:2014 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Part 20: Passenger and goods passenger lifts
This document is CITED BY:
-
D2/AS1 (Amd 7) (Second Edition, Amendment 7)
BS EN 81-20:2014 is cited by Acceptable Solution D2/AS1: Passenger Carrying Lifts from 1/01/2017
-
BS EN 81-50:2014
BS EN 81-20:2014 is cited by BS EN 81-50:2014 Safety rules for the construction and installation of lifts. Examinations and tests. Design rules, calculations, examination and tests of lift components
This resource cites:
BS EN 81-20:2014 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Part 20: Passenger and goods passenger lifts
This document CITES:
BS EN 81-20:2014 cites BS EN 10305-1:2010 Steel tubes for precision applications. Technical delivery conditions - Part 1: Seamless cold drawn tubes
BS EN 81-20:2014 cites BS EN 10305-2:2010 Steel tubes for precision applications. Technical delivery conditions - Part 2: Welded cold drawn tubes
BS EN 81-20:2014 cites BS EN 10305-3:2010 Steel tubes for precision applications. Technical delivery conditions - Part 3: Welded cold sized tubes
BS EN 81-20:2014 cites BS EN 10305-4:2011 Steel tubes for precision applications. Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
BS EN 81-20:2014 cites BS EN 10305-5:2010 Steel tubes for precision applications. Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes
BS EN 81-20:2014 cites BS EN 10305-6:2005 Steel tubes for precision applications. Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
BS EN 81-20:2014 cites BS EN 12015:2014 Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission
BS EN 81-20:2014 cites BS EN 12016:2013 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
BS EN 81-20:2014 cites BS EN 12385-5:2002 Steel wire ropes. Safety - Part 5: Stranded ropes for lifts
BS EN 81-20:2014 cites BS EN 12600:2002 Glass in building. Pendulum test. Impact test method and classification for flat glass
BS EN 81-20:2014 cites BS EN 13015:2001 +A1:2008 Maintenance for lifts and escalators. Rules for maintenance instructions
BS EN 81-20:2014 cites BS EN 131-2:2010 +A1:2012 Ladders - Part 2: Requirements, testing, marking
BS EN 81-20:2014 cites BS EN 13501-1:2007 Fire classification of construction products and building elements - Classification using test data from reaction to fire tests
BS EN 81-20:2014 cites BS EN 1993-1-1:2005 Eurocode 3: Design Of Steel Structures - Part 1-1: General Rules And Rules For Buildings
BS EN 81-20:2014 cites BS EN 50205:2002 Relays with forcibly guided (mechanically linked) contacts
BS EN 81-20:2014 cites BS EN 50214:2006 Flat polyvinyl chloride sheathed flexible cables
BS EN 81-20:2014 cites BS EN 50274:2002 Low-voltage switchgear and controlgear assemblies. Protection against electric shock. Protection against unintentional direct contact with hazardous live parts
BS EN 81-20:2014 cites BS EN 60204-1:2006 +A1:2009 Safety of machinery. Electrical equipment of machines. General requirements
BS EN 81-20:2014 cites BS EN 81-28:2003 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Part 28: Remote alarms on passenger and goods lifts.
BS EN 81-20:2014 cites BS EN 81-50:2014 Safety rules for the construction and installation of lifts. Examinations and tests. Design rules, calculations, examination and tests of lift components
BS EN 81-20:2014 cites BS EN 81-58:2003 Safety rules for the construction and installation of lifts. Examination and tests. Landing doors fire resistance test
BS EN 81-20:2014 cites HD 60364-4-41:2007 Low-voltage Electrical Installations - Part 4-41: Protection For Safety - Protection Against Electric Shock
BS EN 81-20:2014 cites HD 60364-4-42:2011 Low-Voltage Electrical Installations - Part 4-42: Protection For Safety - Protection Against Thermal Effects
BS EN 81-20:2014 cites HD 60364-6:2007 Low Voltage Electrical Installations - Part 6: Verification
BS EN 81-20:2014 cites IEC 60227-6:2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections
BS EN 81-20:2014 cites IEC 60245-5:1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables
BS EN 81-20:2014 cites IEC 60417:2002 DB Graphical symbols for use on equipment
BS EN 81-20:2014 cites IEC 60529:1989 Degrees of protection provided by enclosures (IP Code)
BS EN 81-20:2014 cites IEC 60617:2012 DB Graphical symbols for diagrams
BS EN 81-20:2014 cites IEC 60664-1 Ed. 2.0 b (2007) Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
BS EN 81-20:2014 cites IEC 60947-4-1:2009 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
BS EN 81-20:2014 cites IEC 60947-5-1:2003 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
BS EN 81-20:2014 cites IEC 60947-5-5:1997 +AMD1:2005 Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
BS EN 81-20:2014 cites IEC 61310-3:2007 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
BS EN 81-20:2014 cites IEC 61800-5-2:2007 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
BS EN 81-20:2014 cites IEC 61810-1:2008 Electromechanical elementary relays - Part 1: General requirements
BS EN 81-20:2014 cites ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction
BS EN 81-20:2014 cites ISO 1219-1:2012 Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols for conventional use and data-processing applications
BS EN 81-20:2014 cites ISO 13857:2008 Safety Of Machinery - Safety Distances To Prevent Hazard Zones Being Reached By Upper And Lower Limbs