BS EN 14506:2005 Devices to prevent pollution by backflow of potable water. Automatic diverter. Family H, type C
- Abbreviation
- BS EN 14506:2005
- Valid from
- 31/03/2009
- Information provider
- Standards New Zealand,
- Author
- British Standards Institution,
European Standardizations Organization - Information type
- British Standard,
- Format
- PDF, HARD COPY,
Description
This Standard specifies:
- a) field of application;
- b) requirements for automatic diverters;
- c) dimensional and the physico-chemical properties and the properties of general hydraulic, mechanical and acoustic design of automatic diverters;
- d) test method and requirements for verifying these properties. For sanitary tapware (see Clause 2) with integrated devices, the automatic diverter is only considered to be a backflow protection device if it has passed the requirements of this document and additionally those of the applicable product standard for the draw off tap or mixing valve;
- e) marking and presentation;
- f) acoustics.
This Standard specifies the characteristics of automatic diverters suitable for use in drinking water systems at pressures up to 1 MPa (10 bar) and temperatures up to 65 °C and for 1 h at 90 °C. They are intended only for installation with no downstream closing device.
Scope
This Standard is applicable to the product type indicated as follows:
- i) integrated in spout (outlet);
- ii) integrated in the mixing body;
- iii) non-integrated (part of a set) above the maximum water level.
This Standard is not applicable to the product type non-integrated below the maximum water level.
This resource is cited by:
BS EN 14506:2005 Devices to prevent pollution by backflow of potable water. Automatic diverter. Family H, type C
This document is CITED BY:
-
BS EN 1111:2017
BS EN 14506:2005 is cited by BS EN 1111:2017 Sanitary tapware. Thermostatic mixing valves (PN 10). General technical specification
-
BS EN 1287:2017
BS EN 14506:2005 is cited by BS EN 1287:2017 Sanitary tapware. Low pressure thermostatic mixing valves. General technical specification