Skip to main content Skip to primary navigation
Resource detail
Citations

BS EN 12814-3:2014 Testing of welded joints in thermoplastics semi-finished products - Part 3: Tensile creep test

View on Information Provider website
Abbreviation
BS EN 12814-3:2014
Valid from
28/02/2014
Information provider
British Standards Institution,
Author
British Standards Institution
European Standardization Organisation
Information type
European Standard,
Format
PDF, HARD COPY,
Cited By
This resource is cited by 1 document (show Citations)
Description

BS EN 12814-3 is the third part of the BS EN 12814 series that specifies the dimensions, the method of sampling, the preparation of the test specimens, and the conditions for performing the tensile creep test perpendicular to the weld in order to determine the long-term tensile welding factor. 

A tensile creep test may be used in conjunction with other tests (e.g. bend test, tensile test, macrographic examination, to assess the performance of welded assemblies, made from thermoplastics materials. 

The test is applicable to welded assemblies made from thermoplastics materials filled or unfilled such as tubes and fittings, sheets, plates, and profiles, but not reinforced, irrespective of the welding process used. 

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

BS EN 12814-3:2014 Testing of welded joints in thermoplastics semi-finished products - Part 3: Tensile creep test

This document is CITED BY:

BS EN 12814-3:2014 Testing of welded joints in thermoplastics semi-finished products - Part 3: Tensile creep test

Description

BS EN 12814-3 is the third part of the BS EN 12814 series that specifies the dimensions, the method of sampling, the preparation of the test specimens, and the conditions for performing the tensile creep test perpendicular to the weld in order to determine the long-term tensile welding factor. 

A tensile creep test may be used in conjunction with other tests (e.g. bend test, tensile test, macrographic examination, to assess the performance of welded assemblies, made from thermoplastics materials. 

The test is applicable to welded assemblies made from thermoplastics materials filled or unfilled such as tubes and fittings, sheets, plates, and profiles, but not reinforced, irrespective of the welding process used. 

View on Information Provider website
BS EN 12814-3:2014 Testing of welded joints in thermoplastics semi-finished products - Part 3: Tensile creep test
Description

BS EN 12814-3 is the third part of the BS EN 12814 series that specifies the dimensions, the method of sampling, the preparation of the test specimens, and the conditions for performing the tensile creep test perpendicular to the weld in order to determine the long-term tensile welding factor. 

A tensile creep test may be used in conjunction with other tests (e.g. bend test, tensile test, macrographic examination, to assess the performance of welded assemblies, made from thermoplastics materials. 

The test is applicable to welded assemblies made from thermoplastics materials filled or unfilled such as tubes and fittings, sheets, plates, and profiles, but not reinforced, irrespective of the welding process used. 

View on Information Provider website
This resource does not cite any other resources.

BS EN 12814-3:2014 Testing of welded joints in thermoplastics semi-finished products - Part 3: Tensile creep test

This resource does not CITE any other resources.
Feedback