ANSI/ASME B16.1:1989 Cast iron pipe flanges and flanged fittings, Class 25, 125 , 250 and 800
- Abbreviation
- ANSI/ASME B16.1:1989
- Valid from
- 1/01/1989
- Information provider
- IHS Markit
- Author
- American Society of Mechanical Engineers
- Information type
- Standard
- Format
Description
This Standard for Classes 25, 125, 250 and 800 Cast Iron Pipe Flanges and Flanged Fittings covers:
- a) pressure-temperature ratings
- b) sizes and method of designating openings of reduced fittings
- c) marking
- d) minimum requirements for materials
- e) dimensions and tolerances
- f) bolt, nut, and gasket dimensions
- g) tests
This resource is cited by:
ANSI/ASME B16.1:1989 Cast iron pipe flanges and flanged fittings, Class 25, 125 , 250 and 800
This document is CITED BY:
-
G10/AS1 (First Edition, Amendment 6)
ANSI/ASME B16.1:1989 is cited by Acceptable Solution G10/AS1: Piped Services from 1/07/1992
-
G10/AS1 (First Edition, Amendment 8)
ANSI/ASME B16.1:1989 is cited by Acceptable Solution G10/AS1: Piped Services from 1/07/1992
-
G10/AS1 (First Edition, Amendment 5)
ANSI/ASME B16.1:1989 is cited by Acceptable Solution G10/AS1: Piped Services from 1/07/1992
-
G10/AS1 (First Edition, Amendment 7)
ANSI/ASME B16.1:1989 is cited by Acceptable Solution G10/AS1: Piped Services from 1/07/1992
This resource cites:
ANSI/ASME B16.1:1989 Cast iron pipe flanges and flanged fittings, Class 25, 125 , 250 and 800
This document CITES:
Other
-
ANSI/ASME B1.1-1982
ANSI/ASME B16.1:1989 cites ANSI/ASME B1.1-1982 Unified Inch Screw Threads (UN & UNR Thread Form)
-
ANSI/ASME B1.20.1:1983
ANSI/ASME B16.1:1989 cites ANSI/ASME B1.20.1:1983 (R2006) Pipe threads general purpose (Inch)
-
ANSI/ASME B16.21-1978
ANSI/ASME B16.1:1989 cites ANSI/ASME B16.21-1978 Nonmetallic Flat Gaskets for Pipe Flanges
-
ANSI/ASME B18.2.1-1981
ANSI/ASME B16.1:1989 cites ANSI/ASME B18.2.1-1981 Edition, January 1, 1981 Complete Document Square and Hex Bolts and Screws Inch Series
-
ANSI/ASME B18.2.2-1987
ANSI/ASME B16.1:1989 cites ANSI/ASME B18.2.2-1987 Square and Hex Nuts (Inch Series)
-
ASTM A126-84 (R 1991)
ANSI/ASME B16.1:1989 cites ASTM A126-84 (R 1991) Standard Specification for Gray Iron Castings for Valves, Flanges and Pipe Fittings
-
ASTM A307-84
ANSI/ASME B16.1:1989 cites ASTM A307-84 Standard Specification for Carbon Steel Externally Threaded Standard Fasteners
-
MSS SP 45 - 1982
ANSI/ASME B16.1:1989 cites MSS SP 45 - 1982 Bypass and Drain Connections
-
MSS SP 6 -1985
ANSI/ASME B16.1:1989 cites MSS SP 6 -1985 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
-
MSS SP 9 - 1987
ANSI/ASME B16.1:1989 cites MSS SP 9 - 1987 Spot Facing for Bronze, Iron and Steel Flanges