Skip to main content Skip to primary navigation
Resource detail
Citations

ASTM A53-90 Specification for pipe, steel, black and hot-dipped, zinc-coated welded and seamless

View on Information Provider website
Abbreviation
ASTM A53-90
Version
Revision 90B
Valid from
28/12/1990
Information provider
IHS Markit
Author
American Society of Testing and Materials
Information type
ASTM Standard
Format
PDF, HARD COPY
Cited By
This resource is cited by 4 documents (show Citations)
Cites
This resource cites 12 documents (show Citations)
Description

This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1⁄8 to NPS 26 [DN 6 to DN 650], inclusive with nominal wall thickness.

Pipe ordered under this specification is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas, and air lines. It is suitable for welding, and suitable for forming operations involving coiling, bending, and flanging, subject to qualifications.

Scope

This specification covers the following types and grades:

  • Type F—Furnace-butt-welded, continuous welded Grade A,
  • Type E—Electric-resistance-welded, Grades A and B, and
  • Type S—Seamless, Grades A and B.

This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8 to NPS 26.

The steel categorized must be open-hearth, basic-oxygen or electric-furnace processed and must have the following chemical requirements:

  • carbon,
  • manganese,
  • phosphorus,
  • sulfur,
  • copper,
  • nickel,
  • chromium,
  • molybdenum, and
  • vanadium.

The tubing shall undergo a seamless or welding process. Tension, bend, and flattening tests shall be performed to make sure that it must adhere to the mechanical properties of the standard.

The hydrostatic test shall be applied, without leakage through the weld seam or the pipe body.

Nondestructive electric test shall be made to make sure that the full volume of the pipe must be in accordance with the standard.

The purchaser shall have the right to perform any of the inspections and tests set forth in this specification where deemed necessary to ensure that the pipe conforms to the specified requirements.

 

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ASTM A53-90 Specification for pipe, steel, black and hot-dipped, zinc-coated welded and seamless

This document is CITED BY:

ASTM A53-90 Specification for pipe, steel, black and hot-dipped, zinc-coated welded and seamless

Description

This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1⁄8 to NPS 26 [DN 6 to DN 650], inclusive with nominal wall thickness.

Pipe ordered under this specification is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas, and air lines. It is suitable for welding, and suitable for forming operations involving coiling, bending, and flanging, subject to qualifications.

View on Information Provider website
ASTM A53-90 Specification for pipe, steel, black and hot-dipped, zinc-coated welded and seamless
Description

This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1⁄8 to NPS 26 [DN 6 to DN 650], inclusive with nominal wall thickness.

Pipe ordered under this specification is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas, and air lines. It is suitable for welding, and suitable for forming operations involving coiling, bending, and flanging, subject to qualifications.

View on Information Provider website
This resource cites:

ASTM A53-90 Specification for pipe, steel, black and hot-dipped, zinc-coated welded and seamless

This document CITES:
Other
Feedback