AS 4441(Int)-2003 Oriented PVC (PVC-O) pipes for pressure applications

Abbreviation
AS 4441(Int)-2003
Amendment
AS 4441(Int)-2003/Amdt 1-2004
Valid from
23/05/2003
Replaces
AS 4441(Int)-1996 ,

Information provider
Intertek Inform,
Author
Standards Australia
Information type
Australian Standard,
Format
PDF, HARD COPY,


Description

This Interim Australian Standard specifies the general aspects of pipes and joints made of oriented unplasticized poly (vinyl chloride)(PVC-O), for piping systems intended to be used underground and above ground where not exposed to direct sunlight,for water mains and services, pressurized sewer systems and irrigation systems.

The piping system according to this Standard is intended for the conveyance of cold water under pressure up to 40°C for drinking water and for general purposes up to and including 45°C, and especially in those applications where special performance requirements are needed, such as impact loads and pressure fluctuations,up to pressure ratings of 25 bar.

Joints constructed of other materials shall meet their own relevant standards in addition to the fitness for purpose requirements in this Standard.

Note: Means for demonstrating compliance with this Standard are given in Appendix A.

Pipes intended for drinking water are required to conform to the cold water requirements of AS/NZS 4020. The validity of compliance is limited to 40°C, and it is a recommendation of the Water Services Association of Australia that temperatures of water supply systems be limited to this value.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

AS 4441(Int)-2003 Oriented PVC (PVC-O) pipes for pressure applications

This document is CITED BY:

AS 4441(Int)-2003 Oriented PVC (PVC-O) pipes for pressure applications

Description

This Interim Australian Standard specifies the general aspects of pipes and joints made of oriented unplasticized poly (vinyl chloride)(PVC-O), for piping systems intended to be used underground and above ground where not exposed to direct sunlight,for water mains and services, pressurized sewer systems and irrigation systems.

The piping system according to this Standard is intended for the conveyance of cold water under pressure up to 40°C for drinking water and for general purposes up to and including 45°C, and especially in those applications where special performance requirements are needed, such as impact loads and pressure fluctuations,up to pressure ratings of 25 bar.

Joints constructed of other materials shall meet their own relevant standards in addition to the fitness for purpose requirements in this Standard.

Note: Means for demonstrating compliance with this Standard are given in Appendix A.

Pipes intended for drinking water are required to conform to the cold water requirements of AS/NZS 4020. The validity of compliance is limited to 40°C, and it is a recommendation of the Water Services Association of Australia that temperatures of water supply systems be limited to this value.

View on Information Provider website
AS 4441(Int)-2003 Oriented PVC (PVC-O) pipes for pressure applications
Description

This Interim Australian Standard specifies the general aspects of pipes and joints made of oriented unplasticized poly (vinyl chloride)(PVC-O), for piping systems intended to be used underground and above ground where not exposed to direct sunlight,for water mains and services, pressurized sewer systems and irrigation systems.

The piping system according to this Standard is intended for the conveyance of cold water under pressure up to 40°C for drinking water and for general purposes up to and including 45°C, and especially in those applications where special performance requirements are needed, such as impact loads and pressure fluctuations,up to pressure ratings of 25 bar.

Joints constructed of other materials shall meet their own relevant standards in addition to the fitness for purpose requirements in this Standard.

Note: Means for demonstrating compliance with this Standard are given in Appendix A.

Pipes intended for drinking water are required to conform to the cold water requirements of AS/NZS 4020. The validity of compliance is limited to 40°C, and it is a recommendation of the Water Services Association of Australia that temperatures of water supply systems be limited to this value.

View on Information Provider website
This resource does not cite any other resources.

AS 4441(Int)-2003 Oriented PVC (PVC-O) pipes for pressure applications

This resource does not CITE any other resources.
Feedback