Save

AS 1580.408.4-2004 Paints and related materials - Methods of test - Method 408.4: Adhesion (crosscut)

Abbreviation
AS 1580.408.4-2004
Valid from
26/11/2004

Information provider
SAI Global
Author
Standards Australia
Information type
Australian Standard
Format
Hard copy, PDF


Description

This Standard sets out a method for assessing the adhesion of paint coatings to substrates by applying and removing pressure-sensitive adhesive tape over cuts made in the coating. The method is also applicable as a field procedure, when not under the controlled environmental conditions of AS 1580.101.1, however the temperature of the surface needs to be recorded.

Scope

This Standard is not applicable to soft or friable substrates.

Notes:

  1. The method is not considered suitable for coatings thicker than 125micron.
  2. The method does not distinguish between high levels of adhesion for which more complex procedures are required, such as a pull-off adhesion test similar to ASTMD4541 or ISO4624.
  3. In multi coat systems, if adhesion failure occurs between coats, the adhesion of the coating system to the substrate cannot be determined.
For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

AS 1580.408.4-2004 Paints and related materials - Methods of test - Method 408.4: Adhesion (crosscut)

This document is CITED BY:

AS 1580.408.4-2004 Paints and related materials - Methods of test - Method 408.4: Adhesion (crosscut)

Description

This Standard sets out a method for assessing the adhesion of paint coatings to substrates by applying and removing pressure-sensitive adhesive tape over cuts made in the coating. The method is also applicable as a field procedure, when not under the controlled environmental conditions of AS 1580.101.1, however the temperature of the surface needs to be recorded.

View on Information Provider website
AS 1580.408.4-2004 Paints and related materials - Methods of test - Method 408.4: Adhesion (crosscut)
Description

This Standard sets out a method for assessing the adhesion of paint coatings to substrates by applying and removing pressure-sensitive adhesive tape over cuts made in the coating. The method is also applicable as a field procedure, when not under the controlled environmental conditions of AS 1580.101.1, however the temperature of the surface needs to be recorded.

View on Information Provider website
This resource does not cite any other resources.

AS 1580.408.4-2004 Paints and related materials - Methods of test - Method 408.4: Adhesion (crosscut)

This resource does not CITE any other resources.
Save
Feedback