ISO 20492-4:2010 Preview Glass in buildings -- Insulating glass -- Part 4: Methods of test for the physical attributes of edge seals

Abbreviation
ISO 20492-4:2010
Valid from
1/08/2010

Information provider
Standards New Zealand,
Author
International Organisation for Standardization
Information type
ISO Standard,
Format
PDF, HARD COPY,


Description

ISO 20492-4:2010 specifies methods for testing the edge seal strength, and partially testing the moisture and gas permeation through sealants, of glass insulating units. Other parts of ISO 20492 designate two approaches to the standardization of insulating glass units: approach 1 is intended for use in markets such as North America; and approach 2 is intended for use in markets such as Europe.

The methods in ISO 20492-4:2010 are applicable only to approach 2, as defined and used in the other parts of ISO 20492.

In cases where there is no protection against direct ultraviolet radiation at the edges, such as structural sealant glazing systems, it is necessary that additional European technical specifications be followed.

 

 

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ISO 20492-4:2010 Preview Glass in buildings -- Insulating glass -- Part 4: Methods of test for the physical attributes of edge seals

This document is CITED BY:

ISO 20492-4:2010 Preview Glass in buildings -- Insulating glass -- Part 4: Methods of test for the physical attributes of edge seals

Description

ISO 20492-4:2010 specifies methods for testing the edge seal strength, and partially testing the moisture and gas permeation through sealants, of glass insulating units. Other parts of ISO 20492 designate two approaches to the standardization of insulating glass units: approach 1 is intended for use in markets such as North America; and approach 2 is intended for use in markets such as Europe.

The methods in ISO 20492-4:2010 are applicable only to approach 2, as defined and used in the other parts of ISO 20492.

In cases where there is no protection against direct ultraviolet radiation at the edges, such as structural sealant glazing systems, it is necessary that additional European technical specifications be followed.

 

 

View on Information Provider website
ISO 20492-4:2010 Preview Glass in buildings -- Insulating glass -- Part 4: Methods of test for the physical attributes of edge seals
Description

ISO 20492-4:2010 specifies methods for testing the edge seal strength, and partially testing the moisture and gas permeation through sealants, of glass insulating units. Other parts of ISO 20492 designate two approaches to the standardization of insulating glass units: approach 1 is intended for use in markets such as North America; and approach 2 is intended for use in markets such as Europe.

The methods in ISO 20492-4:2010 are applicable only to approach 2, as defined and used in the other parts of ISO 20492.

In cases where there is no protection against direct ultraviolet radiation at the edges, such as structural sealant glazing systems, it is necessary that additional European technical specifications be followed.

 

 

View on Information Provider website
This resource does not cite any other resources.

ISO 20492-4:2010 Preview Glass in buildings -- Insulating glass -- Part 4: Methods of test for the physical attributes of edge seals

This resource does not CITE any other resources.
Feedback