Skip to main content Skip to primary navigation
Resource detail
Citations

ISA RP31.1-1977 Specification, Installation, and Calibration of Turbine Flowmeter

View on Information Provider website
Abbreviation
ISA RP31.1-1977
Valid from
1/01/1977
Information provider
IHS Markit,
Author
International Society of Automation (ISA)
Information type
Other Standard,
Format
PDF, HARD COPY,
Cited By
This resource is cited by 1 document (show Citations)
Description

These recommendations cover volumetric turbine flowmeters having an electrical output. The flowmeters are used to measure either flow rate or quantity of liquids, and can be either self-generating or modulating. Their use in cryogenic fluids will require special considerations, which are not fully described herein.

  1. This document establishes the following for turbine flowmeters, especially those 2-inch diameter and smaller.
  2. Recommended minimum information to be specified in ordering.
  3. Recommended acceptance and qualification test methods including calibration techniques.
  4. Uniform terminology and drawing symbols.
  5. Recommended installation techniques.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ISA RP31.1-1977 Specification, Installation, and Calibration of Turbine Flowmeter

This document is CITED BY:

ISA RP31.1-1977 Specification, Installation, and Calibration of Turbine Flowmeter

Description

These recommendations cover volumetric turbine flowmeters having an electrical output. The flowmeters are used to measure either flow rate or quantity of liquids, and can be either self-generating or modulating. Their use in cryogenic fluids will require special considerations, which are not fully described herein.

  1. This document establishes the following for turbine flowmeters, especially those 2-inch diameter and smaller.
  2. Recommended minimum information to be specified in ordering.
  3. Recommended acceptance and qualification test methods including calibration techniques.
  4. Uniform terminology and drawing symbols.
  5. Recommended installation techniques.

View on Information Provider website
ISA RP31.1-1977 Specification, Installation, and Calibration of Turbine Flowmeter
Description

These recommendations cover volumetric turbine flowmeters having an electrical output. The flowmeters are used to measure either flow rate or quantity of liquids, and can be either self-generating or modulating. Their use in cryogenic fluids will require special considerations, which are not fully described herein.

  1. This document establishes the following for turbine flowmeters, especially those 2-inch diameter and smaller.
  2. Recommended minimum information to be specified in ordering.
  3. Recommended acceptance and qualification test methods including calibration techniques.
  4. Uniform terminology and drawing symbols.
  5. Recommended installation techniques.
View on Information Provider website
This resource does not cite any other resources.

ISA RP31.1-1977 Specification, Installation, and Calibration of Turbine Flowmeter

This resource does not CITE any other resources.
Feedback