Hydrapanel

Abbreviation
CMNZ70217 version: 0
Version
0
Valid from
2/11/2026

Information provider
Ministry of Business, Innovation and Employment,
Information type
Product Certificate (CodeMark),
Format
PDF,

Description

Hydrapanel are wall and ceiling panels comprised of magnesium oxide board, laminated face and back with high pressure laminate as a sandwich construction.

Hydrapanel have a pre-finished with high pressure smooth decorative laminate or tile textured face and are supplied as a 2700, 3000 or 2400 mm long x 1200 mm wide panels with a nominal thickness of 7.6 mm.

Hydrapanel is a non-structural wall and ceiling lining material, intended for use in wet areas such as bathrooms and kitchens, and in food preparation areas and can be installed on timber or steel framing, or over existing sheet linings.

Hydrapanel can be installed with either proprietary aluminium track or flush fit jointer systems.

Scope

1. The installation of Hydrapanel shall be in accordance with the Hydrapanel Installation and specification guide. Version 5.0 June 2026.

2. Hydrapanel may be installed in parts of buildings where a material group number 2 - S or greater is permitted.

3. Hydrapanel shall be installed to concrete walls using timber battens with a DPC installed between the timber and concrete surface.

4. When installed on timber or lightweight steel framing or masonry, concrete or engineered panel substrates, the substrates shall be clean, dry and free from contaminants including dust.

5. When installed as a wall lining (vertical or horizontal). Studs or nogs must be at a maximum of 600 mm centres.

6. When installed as a as a ceiling lining battens shall be at a maximum of 400 mm centres.

7. Hydrapanel may also be used as a “splashback” behind a cooktop, but the following minimum distances shall be maintained:

  • a. electric cook top - 100 mm from the outer ring of the nearest heating element;
  • b. gas cook top - 200 mm from the closest outer ring of the hob.
For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

Hydrapanel

This document is not CITED BY any other resources:

Hydrapanel

Description

Hydrapanel are wall and ceiling panels comprised of magnesium oxide board, laminated face and back with high pressure laminate as a sandwich construction.

Hydrapanel have a pre-finished with high pressure smooth decorative laminate or tile textured face and are supplied as a 2700, 3000 or 2400 mm long x 1200 mm wide panels with a nominal thickness of 7.6 mm.

Hydrapanel is a non-structural wall and ceiling lining material, intended for use in wet areas such as bathrooms and kitchens, and in food preparation areas and can be installed on timber or steel framing, or over existing sheet linings.

Hydrapanel can be installed with either proprietary aluminium track or flush fit jointer systems.

View on Information Provider website
Hydrapanel
Description

Hydrapanel are wall and ceiling panels comprised of magnesium oxide board, laminated face and back with high pressure laminate as a sandwich construction.

Hydrapanel have a pre-finished with high pressure smooth decorative laminate or tile textured face and are supplied as a 2700, 3000 or 2400 mm long x 1200 mm wide panels with a nominal thickness of 7.6 mm.

Hydrapanel is a non-structural wall and ceiling lining material, intended for use in wet areas such as bathrooms and kitchens, and in food preparation areas and can be installed on timber or steel framing, or over existing sheet linings.

Hydrapanel can be installed with either proprietary aluminium track or flush fit jointer systems.

View on Information Provider website
This resource does not cite any other resources.

Hydrapanel

This resource does not CITE any other resources.
Feedback