Description

XLam CLT T3 + panels are used as individual structural components for floors, internal and external walls and roofs, or as a complete structural system encompassing all of these elements.

The XLam XLT T3+ series is developed as a pre-designed solution and is a standardised alternative to traditional timber construction in residential and light-industrial applications.

XLam CLT T3+ panels are structural timber panels made by face-gluing layers of Hyne T3 + finger-jointed Radiata Pine boards ranging from 20 mm to 45 mm thick with a moisture curing polyurethane adhesive in alternating 90-degree angles. Panels are 90 mm – 350 mm thick, 6m – 16m long and 2.4 m - 3.4 m wide.

The XLam XLT T3+ series are three proprietary laminated timber products: X-Span (floor & roof panels), X- Beam and X – Cassette. Each XLam CLT/XLT T3+ component is labelled with panel dimensions, grade and treatment and the CodeMark mark of conformity

Scope

1. XLam CLT/XLT T3+ are certified for use as structural components:

• a) in buildings specifically designed in accordance with B1/VM1, and
• b) where the hazard class of the exposure and service conditions where the panel is located is H3.2 or less (as defined in NZS3640 Table 3.1)

2. XLam XLT T3+ panels are not certified for use in building elements which have fire rating obligations or surface material obligations. Where these obligations apply, compliance with C3 - Protection from Fire shall be established through specific design.

3. XLam CLT/XLT T3+ shall be designed and installed in accordance with the XLam Site Guide Australia & New Zealand Edition V3 July 2025.