Description

HBS HEATLOK HFO HIGH-LIFT insulation is a site-applied closed cell, medium density 2-part polyurethane spray-in-place foam thermal insulation product.

HBS HEATLOK HFO HIGH-LIFT insulation is a thermal insulation product for walls, ceilings, roofs and underfloors.

Scope

1. HBS HEATLOK HFO HIGH-LIFT Insulation is certified for use in:

• a) timber framed buildings to NZS3604:2011 Timber-Framed Buildings, or
• b) light steel framed buildings to NASH Standard Part 2:2019 Light Steel Framed Buildings, and
• c) located in any climate zone

2. HBS HEATLOK HFO HIGH-LIFT Insulation shall not be installed as an exposed internal surface in a building or part of building where there is a requirement to comply with Building Code clause C3.4a). Where HBS HEATLOK HFO HIGH-LIFT Insulation is installed in a space where the surface lining does have a requirement to comply with C3.4(a), HBS HEATLOK HFO HIGH-LIFT Insulation shall be covered with a rigid sheet product of gypsum plasterboard, plywood, solid wood, wood composite, fibre reinforced cement, concrete or masonry that is not less than 9 mm thick.

3. HBS HEATLOK HFO HIGH-LIFT Insulation shall:

• a) be installed by an ASCC Ltd trained and approved installer, and
• b) in accordance with the TECHNICAL MANUAL for HBS HEATLOK HFO and HBS HEATLOK SOYA HFO (Summer and Winter), for use as an INSULATING THERMAL BARRIER Version 3.1, issued 19th August 2021, and
• c) with sufficient thickness to achieve the R-value specified, but not less than 30 mm, and
• d) with clearance as required around recessed light fittings, chimneys, flues and other hot surfaces, and
• e) be protected from the weather within 6 months.