KLC “Generation 2” H3.2 Exterior Cladding Systems

Abbreviation
CMNZ70062 version 2
Valid from
19/06/2023

Information provider
Ministry of Business, Innovation and Employment,
Author
Bureau Veritas Australia Pty Ltd
Information type
Product Certificate (CodeMark),
Format
PDF,

Description

KLC “Generation 2” H3.2 Exterior Cladding Systems components are finger jointed timber products treated to H3.2 and consist of the following profiles:

  • Horizontal Bevelback - 230 x 18, 215 x 18, 187 x 18, 180 x 18, 142 x 18, 135 x 18, 142 x 21mm (on request)
  • Horizontal Rebated Bevelback - 142 x 18, 135 x 18mm
  • Horizontal Rusticated (incl. Hawkes Bay and Wellington profiles) – 230 x 18, 215 x 18, 180 x 18, 135 x 18mm
  • Vertical Shiplap – 180 x 18, 135 x 18mm
  • Vertical Board and Batten – 180 x 18mm board, 65 x 18mm batten

And components:

  • Fascia in 135, 180, 230, 280 x18mm and 135, 180, 230, 280 x 29mm
  • Vertical Cavity battens in 45 x 20mm
  • Box Corners in 85 x 18 and 100 x 18mm (internal and external)
  • D4S 40, 65, 90, 115, 135, 180, 230, 280 x 18m

KLC “Generation 2” H3.2 Exterior Cladding Systems are designed for use as cladding and finishing systems.

Scope

Subject to the following conditions and limitations:

1. KLC “Generation 2” H3.2 Exterior Cladding Systems are certified for use in buildings:

  • a) within the scope of NZS3604:2011 Timber-framed buildings, and
  • b) with risk score (as determined using the E2/AS1 risk matrix) as set out in Conditions 2 - 4.

2. Vertical Shiplap profiles are certified for risk score 0 – 6 when direct fixed and for risk score 0 – 20 when fixed over a nominal 20mm drained and ventilated cavity.

3. Vertical Board and Batten are certified for risk score 0 -12 when direct fixed and for risk score 0 – 20 when fixed over a nominal 20mm drained and ventilated cavity.

4. The use for other profiles shall be determined using Table 3 of E2/AS1.

5. The KLC Generation 2 Weatherboard & Fascia shall be:

  • a) installed in accordance with the applicable Installation Manual:
    • Bevel Back Weatherboard Direct Fix and Installation Manual (V6, 30 September 2020)
    • Bevel Back Weatherboard Cavity Fix and Installation Manual (V7, 22 February 2022)
    • Rusticated Weatherboard Installation Guide (V4, 30 September 2020)
    • Vertical Shiplap Weatherboard Installation Guide (V3, 30 September 2020)
    • Board & Batten Weatherboard Installation Guide (V2, 30 September 2020)
  • b) painted using a light colour (above the recommended 45LRV) and maintained as per the relevant installation guide.
For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 717KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

KLC “Generation 2” H3.2 Exterior Cladding Systems

This document is not CITED BY any other resources:

KLC “Generation 2” H3.2 Exterior Cladding Systems

Description

KLC “Generation 2” H3.2 Exterior Cladding Systems components are finger jointed timber products treated to H3.2 and consist of the following profiles:

  • Horizontal Bevelback - 230 x 18, 215 x 18, 187 x 18, 180 x 18, 142 x 18, 135 x 18, 142 x 21mm (on request)
  • Horizontal Rebated Bevelback - 142 x 18, 135 x 18mm
  • Horizontal Rusticated (incl. Hawkes Bay and Wellington profiles) – 230 x 18, 215 x 18, 180 x 18, 135 x 18mm
  • Vertical Shiplap – 180 x 18, 135 x 18mm
  • Vertical Board and Batten – 180 x 18mm board, 65 x 18mm batten

And components:

  • Fascia in 135, 180, 230, 280 x18mm and 135, 180, 230, 280 x 29mm
  • Vertical Cavity battens in 45 x 20mm
  • Box Corners in 85 x 18 and 100 x 18mm (internal and external)
  • D4S 40, 65, 90, 115, 135, 180, 230, 280 x 18m

KLC “Generation 2” H3.2 Exterior Cladding Systems are designed for use as cladding and finishing systems.

View on Information Provider website Download this resource (PDF, 717KB)
KLC “Generation 2” H3.2 Exterior Cladding Systems
Description

KLC “Generation 2” H3.2 Exterior Cladding Systems components are finger jointed timber products treated to H3.2 and consist of the following profiles:

  • Horizontal Bevelback - 230 x 18, 215 x 18, 187 x 18, 180 x 18, 142 x 18, 135 x 18, 142 x 21mm (on request)
  • Horizontal Rebated Bevelback - 142 x 18, 135 x 18mm
  • Horizontal Rusticated (incl. Hawkes Bay and Wellington profiles) – 230 x 18, 215 x 18, 180 x 18, 135 x 18mm
  • Vertical Shiplap – 180 x 18, 135 x 18mm
  • Vertical Board and Batten – 180 x 18mm board, 65 x 18mm batten

And components:

  • Fascia in 135, 180, 230, 280 x18mm and 135, 180, 230, 280 x 29mm
  • Vertical Cavity battens in 45 x 20mm
  • Box Corners in 85 x 18 and 100 x 18mm (internal and external)
  • D4S 40, 65, 90, 115, 135, 180, 230, 280 x 18m

KLC “Generation 2” H3.2 Exterior Cladding Systems are designed for use as cladding and finishing systems.

View on Information Provider website Download this resource (PDF, 717KB)
This resource does not cite any other resources.

KLC “Generation 2” H3.2 Exterior Cladding Systems

This resource does not CITE any other resources.
Feedback