Description

NeXTimber® VACSOL AZURE Treated Structural Glue Laminated Timber Members are used as individual structural components (beams, columns or portal frame structures) for floors, internal and external walls and roofs.

NeXTimber® VACSOL AZURE Treated Structural Glue Laminated Timber Members are engineered wood products made from H3.2 treated, finger-jointed and laminated layers of machine graded, kiln-dried and dressed radiata pine, pressed together with an adhesive under pressure to form one singular structural member.

NeXTimber® VACSOL AZURE Treated Structural Glue Laminated Timber Members are available in grade GL13 and GL10 in various dimensions as specified below:

• Depth: 90mm to 1200mm
• Width: 65mm, 85mm, 115mm, 135mm, 185mm, 235mm, 285mm
• Length: 2400mm to 12000mm
• Lamella: 2 to 25 lamella

Scope

1. NeXTimber® VACSOL AZURE Treated Structural Glue Laminated Timber Members are certified for use in the design of buildings by a Chartered Professional Engineer:

• a. with structural design actions determined in accordance with B1/VM1 1st edition. Amendment 21 dated 02, November 2023; and,
• b. in accordance with
  • i. NeXTimber® Technical Guide Version 2.0 August 2024; and,
  • ii. NeXTimber® Fire Performance Guide Version 2.0 July 2024 where integrated in situations requiring fire resistance; and
• c. in applications described in Tables 1, 2, & 3 of NZS 3602:2003 as modified by the Acceptable Solution B2/AS1 amendment 12, 28 November 2019 for radiata pine products up to and including H3.2 Level of Treatment.

2. Unloading, storage, handling and protection, preassembly check and assembly of NeXTimber® VACSOL AZURE Treated Structural Glue Laminated Timber Members shall be done in compliance with the requirement of NeXTimber® Product site Guide Version 1.0 April 2024.

3. The designer shall provide a signed Declaration for submission with the building consent application that the use of this product in the proposed building work falls within the intended used of the system as described in this certificate and that all design conditions of this certificate have been met.

4. The installer shall supply a signed Declaration that the product has been installed in accordance with the installation conditions identified by the Chartered Professional Engineer responsible for the design, and the applicable requirements of NexTimber® Product site Guide Version 1.0 April 2024 for consideration for issuing a Code Compliance Certificate (CCC).