Description

KalsiCTU is a 6mm thick autoclaved cellulose fibre-reinforced cement sheet available in the following sizes: 900mm (w) x 1200mm and 1800mm (l).

• KalsiCTU is a base for laying ceramic tiles over a timber floor or reconstituted wood-based substrate.

KalsiWAB is a 9mm thick autoclaved cellulose fibre-reinforced cement sheet available in the following sizes: 1200 mm (w) x 2400 mm, 2700 mm and 3000mm (l).

• KalsiWAB is an internal wall and ceiling lining in wet and dry areas, and a base for laying ceramic tiles over a timber floor or reconstituted wood-based substrate.

KalsiGroove is an autoclaved cellulose fibre-reinforced cement sheet 7.5mm thick with a 2.5mm deep, 5 mm wide V-shaped groove at 100 mm centers along the sheet length. Sheets are 1200 mm (w) x 2400mm or 2700mm (l).

• KalsiGroove is an internal wall and ceiling lining in dry areas and areas subject to occasional splashes, and an external ceiling, soffit and eaves lining where not directly exposed to the weather.

KalsiFlex is an autoclaved cellulose fibre-reinforced cement sheet available in 1200mm (w) x 2400mm – 3000mm (l) (Refer Technical literature for details).

• KalsiFlex is an internal wall and ceiling lining in wet and dry areas, and external ceiling, soffit and eaves lining where not exposed to the weather.

Scope

1. Kalsi fibre-cement boards have been certified for the uses set out above (in section “Type and/or use of product”), provided:

• a) in applications where a Material Group Number is required (clause C3.4(a)), the Kalsi fibre-cement board is at least 6mm thick and any waterborne or solvent borne paint coating is not greater than 0.4mm thick,
• b) in wet areas the Kalsi fibre-cement board is at least 9mm thick and coated with water resistant paint or tiles (KalsiWAB, or KalsiFlex),
• c) in areas adjacent to food preparation the Kalsi fibre-cement board is at least 9mm thick and coated with water resistant paint or tiles (KalsiWAB, KalsiGroove or KalsiFlex)

2. Kalsi fibre-cement boards shall be installed in accordance with the installation instructions for the uses in Condition #1 in the following documents:

• a) KalsiWAB Installation Manual, June 2021
• b) KalsiGroove Installation Manual, February 2021
• c) KalsiCTU Installation Manual, June 2021
• d) KalsiFlex Installation Manual, May 2021