DuPont Tyvek® Flashing Tapes
- Abbreviation
- CM70071 Rev1
- Version
- Revision 1
- Valid from
- 19/01/2023
- Information provider
- Ministry of Business, Innovation and Employment,
- Author
- Bureau Veritas Australia Pty Ltd
- Information type
- Product Certificate (CodeMark),
- Format
- PDF,
Description
DuPont Tyvek® Flashing Tapes are made of three components (film or fabric carrier, butyl rubber adhesive, and a release liner).
This certificate covers the following products:
- DuPont Flashing Tape (supplied in 22.9m rolls either 101mm, 152mm or 228mm wide)
- DuPont FlexWrap NF (supplied in 22.9 m rolls either 152 mm or 228 mm wide)
DuPont Flashing Tapes are used to flash around windows and doors as a secondary weather-resistant barrier. They may also be used at joinery heads to seal flashing upstands to the wall underlay.
Scope
1. DuPont Flashing Tapes are certified for use in buildings
- a) within the scope of E2/AS1, and
- b) located in any wind zone up to and including EXTRA HIGH as defined in E2/AS1, and
- c) located in any exposure zone.
2. DuPont Flashing Tapes shall be used in accordance with the Installation Guide for DuPont Flashing Tapes V2, 1 April 2015 and the requirements of Acceptable Solution E2/AS1.