CSR Hebel Powerfloor Systems

Abbreviation
CM20245
Valid from
18/10/2021

Information provider
Ministry of Business, Innovation and Employment,
Author
SAI Global Certification Services Pty Limited
Information type
Product Certificate (CodeMark),
Format
PDF,

Description

CSR Hebel® PowerFloor Systems are for use as floor systems in low rise residential, commercial, and industrial buildings.

CSR Hebel® PowerFloor System comprises of:

  • lightweight steel reinforced autoclaved aerated concrete (AAC) panel installed over steel or timber floor joist system forming a platform floor
  • Winstone Wallboards GIB®
  • 90mm ceiling batts with thermal resistance R1.8.

CSR Hebel® PowerFloor panels are 75mm thick reinforced with corrosion-protected steel mesh and have tongue and groove edges.

Scope

1. The product is to be designed and installed only in accordance Hebel® PowerFloor Low Rise Residential & Commercial Floor System Design and Installation Guide New Zealand (HELIT014 – SEP21).

2. The product is certified for use only in low rise residential and commercial applications where no access to floors is required for the purpose of conducting firefighting and rescue operations.

3. The product is not certified for external use in balconies and the design and weathertightness considerations are outside the scope of this certification.

4. The design and installation of timber and/or steel structural floor joists or supporting framing are not covered by this certification and must comply with the relevant design standards.

5. The Fire Resistance Rating (FRR) of Hebel® PowerFloor system for fire exposure from the underside assessed with various Winstone Wallboards ceiling lining must be as detailed for each system in Hebel® PowerFloor Low Rise Residential & Commercial Floor System Design and Installation Guide New Zealand (HELIT014– SEP21). Refer to the system index below in item 10 “SUPPORTING INFORMATION ABOUT INTENDED USE”.

6. The product is not certified for use in Firecells where the requirements of clauses C3.8 of the building code applies.

7. Where the building is within exposure zone D and microclimates as defined in NZS 3604:2011, compliance with B2 Durability is subject to the exposed surface being protected by a suitable acrylic coating.

8. Energy Efficiency and Sound Insulation performance is dependent on the appurtenant ceiling system, floor covering type, and the use of 90mm ceiling batts with thermal resistance R1.8. Refer to the Hebel® PowerFloor Low Rise Residential & Commercial Floor System Design and Installation Guide New Zealand (HELIT014– SEP21) for exact values for each ceiling system.

8. The floor lining must be tested and assessed separately to comply with C3.4(b) of the building code.

9. The product is for use in Earthquake Zone up to and including seismic zone 3 as defined in NZS 3604:2011.

10. Other components as part of the system not manufactured by Hebel must also be installed in accordance with the manufacturers standard and specifications.

 

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

CSR Hebel Powerfloor Systems

This document is not CITED BY any other resources:

CSR Hebel Powerfloor Systems

Description

CSR Hebel® PowerFloor Systems are for use as floor systems in low rise residential, commercial, and industrial buildings.

CSR Hebel® PowerFloor System comprises of:

  • lightweight steel reinforced autoclaved aerated concrete (AAC) panel installed over steel or timber floor joist system forming a platform floor
  • Winstone Wallboards GIB®
  • 90mm ceiling batts with thermal resistance R1.8.

CSR Hebel® PowerFloor panels are 75mm thick reinforced with corrosion-protected steel mesh and have tongue and groove edges.

View on Information Provider website
CSR Hebel Powerfloor Systems
Description

CSR Hebel® PowerFloor Systems are for use as floor systems in low rise residential, commercial, and industrial buildings.

CSR Hebel® PowerFloor System comprises of:

  • lightweight steel reinforced autoclaved aerated concrete (AAC) panel installed over steel or timber floor joist system forming a platform floor
  • Winstone Wallboards GIB®
  • 90mm ceiling batts with thermal resistance R1.8.

CSR Hebel® PowerFloor panels are 75mm thick reinforced with corrosion-protected steel mesh and have tongue and groove edges.

View on Information Provider website
This resource does not cite any other resources.

CSR Hebel Powerfloor Systems

This resource does not CITE any other resources.
Feedback