Description

KS1000RW is an insulated core roof and wall panel. It is suitable for new & refurbishment building applications as a roofing element and as an external wall façade.

KS1000RW is a through fixed system which can be used for building applications with roof slopes of 4° (3° with low pitch details) and above and in both vertical and horizontal wall façade applications.

KS1000RW roof and wall panels consist of an external & internal steel sheet liner with a Polyisocyanurate (PIR) core.

The exterior weather sheet liner is nominal 0.5mm thick Zincalume G300S AM100/150 coated steel sheet.

The internal steel sheet liner is nominal 0.4mm thick Zincalume G300S AM100 coated steel.

Product brochure/catalogue or models identification numbers:

• KS1000RW

Scope

Kingspan KS1000RW, must be installed in accordance with the manufacturer’s Installation Guides as per below;

• a. KS1000RW Trapezoidal Wall Panel Installation Guide – Vertically Laid – Q4 2023
• b. KS1000RW Trapezoidal Wall Panel Installation Guide – Horizontally Laid – Q4 2023
• c. Trapezoidal Roof KS1000RW Installation Guide – 150mm End Lap – Q4 2023
• d. Trapezoidal Roof KS1000RW Installation Guide – 75mm End Lap – November 2019
• e. Kingspan Trapezoidal RW Product Data Sheet – KS1000RW Trapezoidal Roof and Wall Panel – Q3 2023

2. Panel spans must not exceed the manufacturer’s specification for design wind speeds, where the design wind speed is to be either as determined by NZS3604 Table 5.4 (for buildings within the scope of NZS3604:2011 para 1.1.2), or as specifically calculated in accordance with AS/NZS 1170 by a chartered professional engineer (CPENG).

3. Fixing/fastening (including number of fasteners) of the panels to the supporting structure is not covered by this certification. Contact Kingspan Technical Services via their website for project specific advice for fastener requirements.

4. The product is suitable for use within 1 m of the boundary.

5. The product is suitable for use where the inner face of the panel is exposed as the internal lining, in:

• a. any building or use where protected by an automatic fire sprinkler system, or
• b. any un-sprinklered building except:
  
  • i. where care/protection is provided or
  • ii. in exit ways or
  • iii. in occupied spaces in Importance Level 4 buildings or
  • iv. in crowd and sleeping uses (except household units)

6. The product is suitable for exposure zones B, C and D as defined by NZS3604:2011.

7. Certification does not include accessories used with the product.