AS/NZS 4548.4:1999 (R2013) Guide to long-life coatings for concrete and masonry - Latex - Textured coatings - Aggregate filled

Abbreviation
AS/NZS 4548.4:1999
Valid from
4/04/1999

Information provider
Standards New Zealand,
Author
Standards New Zealand, Standards Australia
Information type
New Zealand Standard,
Format
PDF, HARD COPY,


Description

This Standard provides a guide to the features and typical characteristics of long-life, aggregate-filled, textured coatings, intended for exterior or interior use on concrete and masonry, when applied by textured roller, hopper spray or trowel in accordance with the manufacturers instructions.

Scope

Paints covered by this Standard are classified as paint Type 38 of AS 2311 and correspond generally to Australian Paint Approval Scheme specification Type 4 of GPCC- 117. Aggregate-filled, medium to high profile textured coatings are selected for aesthetic purposes and to provide maximum relief of underlying surface irregularities.

The aggregate may consist of sand, marble or other inert mineral constituent. These coatings may be applied by textured roller, hopper spray or trowel, dependent upon the material type selected and the profile required, to achieve a coverage of 0.41.2 m2/L (2.50.8 L/m2).

These coatings are generally specified in a system, including a topcoat as characterized by AS/NZS 4548.2, where maximum resistance to moisture ingress and dirt pick-up is required.

These coatings are not intended for use on horizontal surfaces where water ponding is possible. They are normally specified in systems that may have a sealer and multiple coats.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

AS/NZS 4548.4:1999 (R2013) Guide to long-life coatings for concrete and masonry - Latex - Textured coatings - Aggregate filled

This document is CITED BY:

AS/NZS 4548.4:1999 (R2013) Guide to long-life coatings for concrete and masonry - Latex - Textured coatings - Aggregate filled

Description

This Standard provides a guide to the features and typical characteristics of long-life, aggregate-filled, textured coatings, intended for exterior or interior use on concrete and masonry, when applied by textured roller, hopper spray or trowel in accordance with the manufacturers instructions.

View on Information Provider website
AS/NZS 4548.4:1999 (R2013) Guide to long-life coatings for concrete and masonry - Latex - Textured coatings - Aggregate filled
Description

This Standard provides a guide to the features and typical characteristics of long-life, aggregate-filled, textured coatings, intended for exterior or interior use on concrete and masonry, when applied by textured roller, hopper spray or trowel in accordance with the manufacturers instructions.

View on Information Provider website
This resource does not cite any other resources.

AS/NZS 4548.4:1999 (R2013) Guide to long-life coatings for concrete and masonry - Latex - Textured coatings - Aggregate filled

This resource does not CITE any other resources.
Feedback