Table of Contents
Section 1 Scope And General
1.1 Scope
1.2 Application
1.3 Referenced And Related Documents
1.4 Definitions
1.5 Report Of Test Results
1.6 Related Methods Of Analysis
Section 2 Sampling Preservative Liquids And Preservative-Treated Timber
2.1 General
2.2 Sampling Preservative Liquid
2.3 Method Of Sampling Preservative-Treated Timber
2.4 Preparation Of Test Specimens From The Sample
Section 3 Determination Of Preservative Penetration By Spot Tests
3.1 General
3.2 Preparation Of Test Pieces From Test Specimen
3.3 Recognition Of Penetration
3.4 Evaluation Of Penetration
3.5 Determination Of Pentachlorophenol Penetration In Timber Treated With Oil Solution
3.6 Determination Of Copper Penetration In Timber Treated With Copper-Based Preservatives-Method 1
3.7 Determination Of Copper Penetration In Timber Treated With Copper-Based Preservatives-Method 2
3.8 Determination Of Boron Penetration In Timber Treated With Boron-Based Preservatives
3.9 Determination Of Fluoride Penetration In Timber Treated With Fluoride-Based Preservatives
3.10 Determination Of Tin Penetration In Timber Treated With Tin-Containing Preservatives
Section 4 Analysis Methods For Determination Of Preservative Retention
4.1 General
4.2 Preparation Of Test Pieces From Test Specimen
4.3 Determination Of Copper, Chromium And Arsenic In Preservative-Treated Timber
4.4 Determination Of Boron In Preservative-Treated Timber
4.5 Determination Of Fluoride In Preservative-Treated Timber
4.6 Determination Of Pentachlorophenol (PCP) In Preservative-Treated Timber
4.7 Determination Of Creosote Or Pigment-Emulsified Creosote In Preservative-Treated Timber
4.8 Determination Of Tri-(N-Butyl) Tin Oxide In Preservative-Treated Timber
4.9 Determination Of Organochlorine Insecticides In Preservative-Treated Timber
4.10 Determination Of Copper In Copper Naphthenate In Preservative-Treated Timber
4.11 Determination Of Tin In Tri-(N-Butyl) Tin Oxide (TBTO) In Preservative-Treated Timber
4.12 Determination Of Tin In Tri-(N-Butyl) Tin Naphthenate (TBTN) In Preservative-Treated Timber
4.13 Determination Of Copper In ACQ (Ammoniacal Copper Quaternary) In Preservative-Treated Timber
Section 5 Analysis Methods For Determination Of Preservative Solution Concentration
5.1 General
5.2 Preparation Of Preservative Liquids And Solutions For Analysis
5.3 Determination Of Copper, Hexavalent Chromium, And Arsenic In CCa Preservative Solutions
5.4 Determination Of Boron In Preservative Solution
5.5 Determination Of Fluoride In Preservative Solution By Ion-Selective Electrode
5.6 Determination Of Pentachlorophenol In Preservative Solutions
5.7 Determination Of Tri-(N-Butyl) Tin Oxide (TBTO) In Preservative Treatment Solutions
5.8 Determination Of Organochlorine Insecticides In Preservative Treatment Solutions
5.9 Determination Of Tin In Tri-(N-Butyl) Tin Oxide (TBTO) Preservative Solutions By Atomic Absorption Spectrophotometry
5.10 Determination Of Tin In Tri-(N-Butyl) Tin Naphthenate (TBTN) Preservative Solutions By Atomic Absorption Spectrophotometry
5.11 Determination Of Ammonia In ACQ Preservative Solutions
5.12 Determination Of Copper In ACQ Preservative Solutions
5.13 Determination Of Water Content In High Temperature Creosote
5.14 Determination Of Matter Insoluble In Toluene For High Temperature Creosote
5.15 Determination Of Relative Density Of High Temperature Creosote
5.16 Test Of Distillation For High Temperature Creosote
5.17 Determination Of Coke Residue In High Temperature Creosote
5.18 Determination Of Phenols (Tar Acids) In High Temperature Creosote
5.19 Determination Of Closed Flashpoint Of High Temperature Creosote (Closed Cup)
5.20 Determination Of Limpid Point Of High Temperature Creosote
Section 6 Determination Of Presence Of Sapwood
6.1 General
6.2 Determination Of Presence Of Sapwood In Coniferous Timber
6.3 Determination Of Presence Of Sapwood In Some Eucalypt Timbers
Appendix A - Examples Of A Test Certificate
Appendix B - Means For Demonstrating Compliance With This Standard