AS 3706.12012 Geotextiles  Methods of test General requirements, sampling, conditioning, basic physical properties and statistical analysis
 Abbreviation
 AS 3706.12012
 Valid from
 30/04/2012
 Information provider
 SAI Global
 Author
 Standards Australia
 Information type
 Australian Standard
 Format
 PDF, Hard copy
Description
This Standard sets out general requirements for the testing of fabrics intended for use as geotextiles.
It sets out sampling and conditioning procedures, the methods for the determination of basic physical properties such as length and mass per unit area, and the principles of statistical analysis to be applied to the other Standards in this series, as appropriate.
NOTE: Guidance on statistical analysis is given in Appendix A.
This resource is cited by:
AS 3706.12012 Geotextiles  Methods of test General requirements, sampling, conditioning, basic physical properties and statistical analysis
This document is CITED BY:

E1/VM1 (Amd 11) (First Edition, Amendment 11)
AS 3706.12012 is cited by Verification Method E1/VM1: Surface Water from 5/11/2020
This resource cites:
AS 3706.12012 Geotextiles  Methods of test General requirements, sampling, conditioning, basic physical properties and statistical analysis
This document CITES:
Australian Standards

AS 2001.11995
AS 3706.12012 cites AS 2001.11995 (R2016) Methods of test for textiles  Part 1: Conditioning procedures

AS 2001.2.121987
AS 3706.12012 cites AS 2001.2.121987 (R2016) Methods of test for textiles  Physical tests  Determination of width of fabrics

AS 2001.2.131987
AS 3706.12012 cites AS 2001.2.131987 (R2016) Methods of test for textiles  Physical tests  Determination of mass per unit area and mass per unit length of fabrics

AS 2001.2.151989
AS 3706.12012 cites AS 2001.2.151989 (R2016) Methods of test for textiles  Physical tests  Determination of thickness of textile fabrics

AS 24901997
AS 3706.12012 cites AS 24901997 Sampling procedures and charts for inspection by variables for percent nonconforming

AS 3706.10.12012
AS 3706.12012 cites AS 3706.10.12012 Geotextiles  Methods of test  Determination of transmissivity  Radial method

AS 3706.112012
AS 3706.12012 cites AS 3706.112012 Geotextiles  Methods of test Determination of durability  Resistance to degradation by light, heat and moisture

AS 3706.122001
AS 3706.12012 cites AS 3706.122001 (R2018) Geotextiles  Methods of test  Determination of durability  Resistance to degradation by hydrocarbons or chemical reagents

AS 3706.132012
AS 3706.12012 cites AS 3706.132012 Geotextiles  Methods of test Determination of durability  Resistance to certain microbiological agents

AS 3706.22012
AS 3706.12012 cites AS 3706.22012 Geotextiles  Methods of test Determination of tensile properties  Wide strip and grab method

AS 3706.32012
AS 3706.12012 cites AS 3706.32012 Geotextiles  Methods of test Determination of tearing strength  Trapezoidal method

AS 3706.42012
AS 3706.12012 cites AS 3706.42012 Geotextiles  Methods of test Determination of burst strength  California bearing ratio (CBR)  Plunger method

AS 3706.52000
AS 3706.12012 cites AS 3706.52000 Geotextiles  Methods of test  Determination of puncture resistance  Drop cone method

AS 3706.62012
AS 3706.12012 cites AS 3706.62012 Geotextiles  Methods of test  Determination of seam strength

AS 3706.72003
AS 3706.12012 cites AS 3706.72003 Geotextiles  Methods of test  Determination of poresize distribution  Drysieving method

AS 3706.92012
AS 3706.12012 cites AS 3706.92012 Geotextiles  Methods of test Determination of permittivity, permeability and flow rate
Other

ISO 3933:1976
AS 3706.12012 cites ISO 3933:1976 Textiles  Woven fabrics  Measurement of length of pieces