AS 1580.301.2-1990 (R2013) Paints and related materials - Methods of test - Method 301.2: Non-volatile content by volume (volume solids)

Abbreviation
AS 1580.301.2-1990
Amendment
Non-volatile content by volume (volume solids)
Valid from
1/01/1990

Information provider
Intertek Inform,
Author
Standards Australia
Information type
Australian Standard,
Format
PDF, HARD COPY,


Description

This Method describes a procedure for determining the non-volatile matter, as percent by volume, in paints and related materials for a specified wet film thickness, under prescribed conditions. It includes an evacuation stage necessary for flat and low-gloss products to ensure the removal of entrapped air, voids and volatile inclusions.

Notes:

  1. The value obtained by this Method takes into account any chemical or physical changes that have occurred in the paint during drying, and may not be the same as that calculated on the basis of addition of the masses and volumes of the raw materials in the formulation.
  2. Appendix A provides an alternative method (the dish method) which limited interlaboratory trials indicate will result in improved reproducibility.

Scope



For assistance with locating previous versions, please contact the information provider.
Notes/comments

Standard reconfirmed 8 April 2013

View on Information Provider website
For assistance with locating previous versions, please contact the information provider.

Standard reconfirmed 8 April 2013

This resource is cited by:

AS 1580.301.2-1990 (R2013) Paints and related materials - Methods of test - Method 301.2: Non-volatile content by volume (volume solids)

This document is CITED BY:

AS 1580.301.2-1990 (R2013) Paints and related materials - Methods of test - Method 301.2: Non-volatile content by volume (volume solids)

Description

This Method describes a procedure for determining the non-volatile matter, as percent by volume, in paints and related materials for a specified wet film thickness, under prescribed conditions. It includes an evacuation stage necessary for flat and low-gloss products to ensure the removal of entrapped air, voids and volatile inclusions.

Notes:

  1. The value obtained by this Method takes into account any chemical or physical changes that have occurred in the paint during drying, and may not be the same as that calculated on the basis of addition of the masses and volumes of the raw materials in the formulation.
  2. Appendix A provides an alternative method (the dish method) which limited interlaboratory trials indicate will result in improved reproducibility.

View on Information Provider website
AS 1580.301.2-1990 (R2013) Paints and related materials - Methods of test - Method 301.2: Non-volatile content by volume (volume solids)
Description

This Method describes a procedure for determining the non-volatile matter, as percent by volume, in paints and related materials for a specified wet film thickness, under prescribed conditions. It includes an evacuation stage necessary for flat and low-gloss products to ensure the removal of entrapped air, voids and volatile inclusions.

Notes:

  1. The value obtained by this Method takes into account any chemical or physical changes that have occurred in the paint during drying, and may not be the same as that calculated on the basis of addition of the masses and volumes of the raw materials in the formulation.
  2. Appendix A provides an alternative method (the dish method) which limited interlaboratory trials indicate will result in improved reproducibility.
View on Information Provider website
This resource does not cite any other resources.

AS 1580.301.2-1990 (R2013) Paints and related materials - Methods of test - Method 301.2: Non-volatile content by volume (volume solids)

This resource does not CITE any other resources.
Feedback