Description

Glasscorp Fabricator MSHP High Performance MS Sealant is a weatherproofing sealant for exterior use and a general purpose gap-filling sealant for exterior and interior use.

Scope

1. Glasscorp Fabricator MSHP MS High Performance MS Construction Sealant has been appraised for  use as an exterior sealant in buildings within the following scope:

• the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1.

2. Glasscorp Fabricator MSHP MS High Performance MS Construction Sealant has also been  appraised for use as an internal and external sealant in buildings subject to specific design within  the following scope:

• in joints with a minimum depth of 5 mm; and,
• in joints with a minimum width of 5 mm and maximum width of 35 mm; and,
• with substrates of:
  • timber (unpainted and unstained) – particleboard, fibreboard, untreated pine, boric treated  pine, tanalised pine, New Zealand natives, or untreated Cedar or Douglas Fir; or,
  • plastics – PVC, melamine sheet, fibreglass (gelcoat side only), polyurethane coatings,  epoxy and polyester coatings or epoxy mortars; or,
  • mineral – concrete, mortar, plaster, blockwork, brickwork, fibre cement sheeting, unglazed  tiles, earthenware (clay), glazed ceramic tiles, stoneware (e.g. Hinuera stone and Oamaru  stone), marble or granite; or,
  • metal – stainless steel, copper, brass, zinc anneal, aluminium-zinc, zinc bronze, lead, tin,  galvanised steel, mild steel, cast iron or aluminium (milled, anodised or powder-coated); or,
  • stoved enamel.

Note: Substrates or materials other than those specified above have not been assessed and are  outside the scope of this Appraisal. Glasscorp Ltd must be consulted when proposing the sealing  of material not specifically covered by this Appraisal.