Watergate Plus Wall Underlay
- Abbreviation
- Appraisal number 695 (2023)
- Valid from
- 8/02/2023
- Information provider
- BRANZ Limited,
- Information type
- BRANZ Appraisal,
- Format
- PDF,
Description
Watergate Plus is a fire retardant, flexible synthetic wall underlay for use under direct-fixed and non-direct-fixed wall cladding on timber and steel-framed buildings.
The product is manufactured from coated, non-woven polyolefin and is coloured white.
Scope
Flexible Wall Underlay
Watergate Plus has been appraised for use as a flexible wall underlay for buildings within the following scope:
- the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 for timber-framed buildings; and,
- the scope limitations of NASH Building Envelope Solutions, Paragraph 1.1 for steel-framed buildings; and,
- with direct fixed absorbent and non-absorbent wall claddings; or,
- with absorbent and non-absorbent wall claddings installed over an 18 mm minimum drained cavity; or,
- with masonry veneer in accordance with NZBC Acceptable Solution E2/AS1 for timber-framed buildings or to NASH Building Envelope Solutions for steel-framed buildings; and,
- situated in NZS 3604 Wind Zones up to and including Very High.
Use over Rigid Wall Underlay
Watergate Plus has been appraised for use as a flexible wall underlay over rigid wall underlays on buildings within the following scope:
- the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 for timber-framed buildings; and,
- the scope limitations of NASH Building Envelope Solutions, Paragraph 1.1 for steel-framed buildings; and,
- with absorbent and non-absorbent wall claddings installed over an 18 mm minimum drained cavity; and,
- with masonry veneer in accordance with NZBC Acceptable Solution E2/AS1 for timber-framed buildings or NASH Building Envelope Solutions for steel-framed buildings; and,
- situated in NZS 3604 and NASH Standard Part 2 Wind Zones up to and including Extra High.
Specific Design
Watergate Plus has also been appraised for use on buildings subject to specific weathertightness design. Building designers are responsible for the building design and for the incorporation of Watergate Plus into their design in accordance with the declared properties and the instructions of Kingspan Insulation NZ Limited.