Description

Davco K10 Plus, K10 Rapid and Davco K12 are liquid-applied waterproofing membranes for use under ceramic or stone tile finishes in internal wet areas.

Scope

1.  Davco K10 Plus, K10 Rapid and Davco K12 have been appraised for use as waterproofing membranes for internal wet areas of buildings, within the following scope:

• on floor substrates of concrete, flooring grade particleboard, plywood, compressed fibre cement sheet and fibre  cement sheet tile underlay, and on wall substrates of concrete, concrete masonry, wet area fibre cement sheet lining systems and wet area plasterboard lining systems; and,
• when protected from physical damage by ceramic or stone tile finishes; and,
• where floors are designed and constructed such that deflections do not exceed 1/360th of the span.

2.  The use of Davco K10 Plus, K10 Rapid and Davco K12 Wet Area Membranes on concrete slabs and walls where hydrostatic or vapour pressure is present is outside the scope of this Appraisal.

3.  Movement and control joints in the substrate must be carried through to the tile finish. The design and construction of the substrate and movement and control joints is specific to each building, and therefore the responsibility of the building designer and building contractor and is outside the scope of this Appraisal.

4.  Ceramic or stone tile finishes are outside the scope of this Appraisal.

5. The membranes must be installed by Sika Australia Pty Ltd approved and trained applicators.