Description

Eproducts Penetration Seal is a wall cladding pipe and service penetration seal consisting of an elastic EPDM sleeve fitted with a self-adhesive flange.

Scope

Eproducts Penetration Seal has been appraised for use as a pipe and service penetration seal for use where the penetration passes through the wall underlay on framed buildings within the following scope:

• the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 for timber-framed buildings; or
• the scope limitations of NASH Building Envelope Solutions, Paragraph 1.1 for steel-framed buildings; and,
• with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1 or NASH Building Envelope Solutions, Table 2; and,
• with flexible and rigid wall underlays compatible with the seal and complying with the NZBC; and,
• situated in NZS 3604 and NASH Standard Part Two Wind Zones up to, and including, Extra High.

Eproducts Penetration Seal has also been appraised for use on buildings subject to specific weathertightness design. Building designers are responsible for the building design and for the incorporation of Eproducts Penetration Seal into their design, in accordance with the declared properties and the instructions of E-Products NZ Ltd.