Save

ISO 4200:1991 Plain end steel tubes, welded and seamless - General tables of dimensions and masses per unit length

Abbreviation
ISO 4200:1991
Valid from
21/02/1991

Information provider
Standards New Zealand
Author
International Organization for Standardization
Information type
ISO Standard
Format
PDF


Description

This Standard gives values of both plain end tubes for general purpose use and precision tubes. Its purpose is to give guidance on the selection of sizes for all activities concerned with the standardization of steel tubes, both nationally and internationally, to serve as a ready reckoner and to avoid the use by different countries of different masses for a tube of the same size. It is not applicable to tubes primarily intended to be screwed.

This fourth edition cancels and replaces the third edition (1985), tables 2 and 3 of which have been technically revised by the addition of the outside diameter of 12.7 mm to series 2.

Scope

This International standard gives tables of dimensions, in millimeters, and masses per unit length, in kilograms per metre, of plain end steel tubes.

It covers two groups of tubes :

  • Group 1: tubes for general purpose use (see table 2);
  • Group 2: precision tubes (see table 3).

The outside diameters are classified into three series for group 1 and into two series for group 2. The classification of outside diameters and the selection of preferred thicknesses offers information on which tube dimensions should be selected for national and international standards for either general purposes or particular use and application. The use of this information will ensure the selection of the most favourable dimensions for particular purposes.

It should be noted that the inclusion in tables 2 and 3 of a mass for a given size of tube, which does not have a series 1 outside diameter and preferred thickness, does not necessarily mean that it is available. Should the mass of a tube of dimensions other than those given in tables 2 and 3 be required, it has to be calculated using the formula given in clause 4.

This International standard is not applicable to tubes primarily intended to be screwed in accordance with ISO 7-1[1]. The masses of such tubes, both screwed and plain end, are given in ISO 65[2].

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ISO 4200:1991 Plain end steel tubes, welded and seamless - General tables of dimensions and masses per unit length

This document is CITED BY:

ISO 4200:1991 Plain end steel tubes, welded and seamless - General tables of dimensions and masses per unit length

Description

This Standard gives values of both plain end tubes for general purpose use and precision tubes. Its purpose is to give guidance on the selection of sizes for all activities concerned with the standardization of steel tubes, both nationally and internationally, to serve as a ready reckoner and to avoid the use by different countries of different masses for a tube of the same size. It is not applicable to tubes primarily intended to be screwed.

This fourth edition cancels and replaces the third edition (1985), tables 2 and 3 of which have been technically revised by the addition of the outside diameter of 12.7 mm to series 2.

View on Information Provider website
ISO 4200:1991 Plain end steel tubes, welded and seamless - General tables of dimensions and masses per unit length
Description

This Standard gives values of both plain end tubes for general purpose use and precision tubes. Its purpose is to give guidance on the selection of sizes for all activities concerned with the standardization of steel tubes, both nationally and internationally, to serve as a ready reckoner and to avoid the use by different countries of different masses for a tube of the same size. It is not applicable to tubes primarily intended to be screwed.

This fourth edition cancels and replaces the third edition (1985), tables 2 and 3 of which have been technically revised by the addition of the outside diameter of 12.7 mm to series 2.

View on Information Provider website
This resource does not cite any other resources.

ISO 4200:1991 Plain end steel tubes, welded and seamless - General tables of dimensions and masses per unit length

This resource does not CITE any other resources.
Save
Feedback