ASTM G154 - 06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials

Abbreviation
ASTM G154 - 06
Valid from
1/01/2006

Information provider
American Society of Testing and Materials,
Author
American Society of Testing and Materials
Information type
ASTM Standard,
Format
PDF,


Description

This practice covers the basic principles and operating procedures for using fluorescent UV light, and water apparatus intended to reproduce the weathering effects that occur when materials are exposed to sunlight (either direct or through window glass) and moisture as rain or dew in actual usage. This practice is limited to the procedures for obtaining, measuring, and controlling conditions of exposure.

Test specimens are exposed to fluorescent UV light under controlled environmental conditions. Different types of fluorescent UV light sources are described.

Specimen preparation and evaluation of the results are covered in ASTM methods or specifications for specific materials. General guidance is given in Practice G 151 and ISO 4892-1. More specific information about methods for determining the change in properties after exposure and reporting these results is described in ISO 4582.

 

This document is referenced in E2/AS1 in regard to closed cell foam tape

Scope

 

 

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ASTM G154 - 06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials

This document is CITED BY:

ASTM G154 - 06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials

Description

This practice covers the basic principles and operating procedures for using fluorescent UV light, and water apparatus intended to reproduce the weathering effects that occur when materials are exposed to sunlight (either direct or through window glass) and moisture as rain or dew in actual usage. This practice is limited to the procedures for obtaining, measuring, and controlling conditions of exposure.

Test specimens are exposed to fluorescent UV light under controlled environmental conditions. Different types of fluorescent UV light sources are described.

Specimen preparation and evaluation of the results are covered in ASTM methods or specifications for specific materials. General guidance is given in Practice G 151 and ISO 4892-1. More specific information about methods for determining the change in properties after exposure and reporting these results is described in ISO 4582.

 

This document is referenced in E2/AS1 in regard to closed cell foam tape

View on Information Provider website
ASTM G154 - 06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
Description

This practice covers the basic principles and operating procedures for using fluorescent UV light, and water apparatus intended to reproduce the weathering effects that occur when materials are exposed to sunlight (either direct or through window glass) and moisture as rain or dew in actual usage. This practice is limited to the procedures for obtaining, measuring, and controlling conditions of exposure.

Test specimens are exposed to fluorescent UV light under controlled environmental conditions. Different types of fluorescent UV light sources are described.

Specimen preparation and evaluation of the results are covered in ASTM methods or specifications for specific materials. General guidance is given in Practice G 151 and ISO 4892-1. More specific information about methods for determining the change in properties after exposure and reporting these results is described in ISO 4582.

 

This document is referenced in E2/AS1 in regard to closed cell foam tape

View on Information Provider website
This resource cites:

ASTM G154 - 06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials

This document CITES:
Feedback