ASTM E96 - 95 Standard Test Methods for Water Vapor Transmission of Materials

Abbreviation
ASTM E96 - 95
Valid from
6/03/1995

Information provider
American Society of Testing and Materials,
Author
American Society of Testing and Materials
Information type
ASTM Standard,
Format
PDF,


Description

These test methods cover the determination of water vapor transmission (WVT) of materials through which the passage of water vapor may be of importance, such as paper, plastic films, other sheet materials, fiberboards, gypsum and plaster products, wood products, and plastics. The test methods are limited to specimens not over 11/4 in. [32 mm] in thickness except as provided in in this Standard.

Two basic methods, the Desiccant Method and the Water Method, are provided for the measurement of permeance, and two variations include service conditions with one side wetted and service conditions with low humidity on one side and high humidity on the other.

Agreement should not be expected between results obtained by different methods. The method should be selected that more nearly approaches the conditions of use.

For assistance with locating previous versions, please contact the information provider.
Notes/comments

Note: The above link to this Standard refers users to ASTM E96-1995. The 1995 edition replicates the ASTM E96-1994, but includes an important editorial correction to a mistake found in Table 1 of the 1994 edition.

View on Information Provider website
For assistance with locating previous versions, please contact the information provider.

Note: The above link to this Standard refers users to ASTM E96-1995. The 1995 edition replicates the ASTM E96-1994, but includes an important editorial correction to a mistake found in Table 1 of the 1994 edition.

This resource is cited by:

ASTM E96 - 95 Standard Test Methods for Water Vapor Transmission of Materials

This document is CITED BY:

ASTM E96 - 95 Standard Test Methods for Water Vapor Transmission of Materials

Description

These test methods cover the determination of water vapor transmission (WVT) of materials through which the passage of water vapor may be of importance, such as paper, plastic films, other sheet materials, fiberboards, gypsum and plaster products, wood products, and plastics. The test methods are limited to specimens not over 11/4 in. [32 mm] in thickness except as provided in in this Standard.

Two basic methods, the Desiccant Method and the Water Method, are provided for the measurement of permeance, and two variations include service conditions with one side wetted and service conditions with low humidity on one side and high humidity on the other.

Agreement should not be expected between results obtained by different methods. The method should be selected that more nearly approaches the conditions of use.

View on Information Provider website
ASTM E96 - 95 Standard Test Methods for Water Vapor Transmission of Materials
Description

These test methods cover the determination of water vapor transmission (WVT) of materials through which the passage of water vapor may be of importance, such as paper, plastic films, other sheet materials, fiberboards, gypsum and plaster products, wood products, and plastics. The test methods are limited to specimens not over 11/4 in. [32 mm] in thickness except as provided in in this Standard.

Two basic methods, the Desiccant Method and the Water Method, are provided for the measurement of permeance, and two variations include service conditions with one side wetted and service conditions with low humidity on one side and high humidity on the other.

Agreement should not be expected between results obtained by different methods. The method should be selected that more nearly approaches the conditions of use.

View on Information Provider website
This resource does not cite any other resources.

ASTM E96 - 95 Standard Test Methods for Water Vapor Transmission of Materials

This resource does not CITE any other resources.
Feedback