Save

ASTM A269/A269M-14 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

Abbreviation
ASTM A269/A269M-14
Valid from
01/05/2014

Information provider
American Society of Testing and Materials
Author
American Society of Testing and Materials
Information type
ASTM Standard
Format
PDF


Description

This specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service.

Scope

This specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service, as designated in Table 1.

The tubing sizes and thicknesses usually furnished to this specification are 1/4 in. [6.4 mm] in inside diameter and larger and 0.020 in. [0.51 mm] in nominal wall-thickness and heavier.

Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.38 mm] in thickness.

Note 1Additional testing requirements may apply for use in ASME B31.3 applications.

Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.

The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ASTM A269/A269M-14 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

This document is CITED BY:

ASTM A269/A269M-14 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

Description

This specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service.

View on Information Provider website
ASTM A269/A269M-14 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
Description

This specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service.

View on Information Provider website
This resource does not cite any other resources.

ASTM A269/A269M-14 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

This resource does not CITE any other resources.
Save
Feedback