Save

ASTM A135 / A135M - 06 Specification for electric-resistance-welded steel pipe

Abbreviation
ASTM A135 / A135M - 06
Valid from
01/03/2006

Information provider
American Society of Testing and Materials
Author
American Society of Testing and Materials
Information type
ASTM Standard
Format
PDF


Description

This specification covers two grades of electric-resistance-welded steel pipe in NPS 2 to NPS 30 [DN 50 to DN 750] inclusive, with nominal (average) wall thickness up to 0.500 in. [12.70 mm], inclusive, and in nominal sizes NPS 3/ 4 to NPS 5 [DN 20 to DN 125] inclusive with nominal (average) wall thickness 0.083 in. [2.11 mm] to 0.134 in. [3.40 mm], depending on size. Pipe having other dimensions (Note 0) may be furnished provided such pipe complies with all other requirements of this specification.

The pipe is intended for conveying gas, vapor, water or other liquid; only Grade A is adapted for flanging and bending.

When pipe is cold expanded, the amount of expansion shall not exceed 1.5 % of the outside diameter pipe size.

For assistance with locating previous versions, please contact the information provider.
Notes/comments

This Standard is referenced in regard to fire sprinkler systems.

View on Information Provider website
For assistance with locating previous versions, please contact the information provider.

This Standard is referenced in regard to fire sprinkler systems.

This resource is cited by:

ASTM A135 / A135M - 06 Specification for electric-resistance-welded steel pipe

This document is CITED BY:

ASTM A135 / A135M - 06 Specification for electric-resistance-welded steel pipe

Description

This specification covers two grades of electric-resistance-welded steel pipe in NPS 2 to NPS 30 [DN 50 to DN 750] inclusive, with nominal (average) wall thickness up to 0.500 in. [12.70 mm], inclusive, and in nominal sizes NPS 3/ 4 to NPS 5 [DN 20 to DN 125] inclusive with nominal (average) wall thickness 0.083 in. [2.11 mm] to 0.134 in. [3.40 mm], depending on size. Pipe having other dimensions (Note 0) may be furnished provided such pipe complies with all other requirements of this specification.

The pipe is intended for conveying gas, vapor, water or other liquid; only Grade A is adapted for flanging and bending.

When pipe is cold expanded, the amount of expansion shall not exceed 1.5 % of the outside diameter pipe size.

View on Information Provider website
ASTM A135 / A135M - 06 Specification for electric-resistance-welded steel pipe
Description

This specification covers two grades of electric-resistance-welded steel pipe in NPS 2 to NPS 30 [DN 50 to DN 750] inclusive, with nominal (average) wall thickness up to 0.500 in. [12.70 mm], inclusive, and in nominal sizes NPS 3/ 4 to NPS 5 [DN 20 to DN 125] inclusive with nominal (average) wall thickness 0.083 in. [2.11 mm] to 0.134 in. [3.40 mm], depending on size. Pipe having other dimensions (Note 0) may be furnished provided such pipe complies with all other requirements of this specification.

The pipe is intended for conveying gas, vapor, water or other liquid; only Grade A is adapted for flanging and bending.

When pipe is cold expanded, the amount of expansion shall not exceed 1.5 % of the outside diameter pipe size.

View on Information Provider website
This resource does not cite any other resources.

ASTM A135 / A135M - 06 Specification for electric-resistance-welded steel pipe

This resource does not CITE any other resources.
Save
Feedback