Save

StoTherm Masonry Insulation System

Abbreviation
Appraisal number 604
Amendment
11/11/2015
Valid from
24/09/2008

Information provider
´╗┐BRANZ Limited
Information type
BRANZ Appraisal
Format
PDF

Description

The StoTherm Masonry Insulation System is an exterior insulating and finishing system for concrete masonry, in-situ or pre-cast concrete walls.

The system consists of expanded polystyrene (EPS) StoTherm Panels fixed to the concrete masonry or concrete wall with adhesive mortar and mechanical anchors. The plaster system consists of an 8 - 12 mm thickness of fibreglass mesh reinforced synthetic resin plasters and synthetic resin finishing plasters applied to the StoTherm Panels. The plaster system is finished with a 100% acrylic exterior paint system. The top coat plasters can be textured to give different finished appearances.

Scope

The StoTherm Masonry Insulation System has been appraised as an exterior insulating and finishing system for buildings within the following scope:

  • with substrates of concrete masonry, in-situ or pre-cast concrete, up to 3 storeys,
  • with a maximum height from ground to eaves of 10 m; and,
  • with floor plan area limited only by seismic and structural control joints; and,
  • with supporting structures designed and constructed in accordance with the NZBC; and,
  • situated in NZS 3604 Wind Zones up to, and including Extra'.

The StoTherm Masonry Insulation System has also been appraised for bond/fixing, durability and weathertightness of the exterior insulating and finishing system for concrete masonry, in-situ or pre-cast concrete buildings subject to specific design up to a differential design ultimate limit state (ULS) wind pressure of 2.5 kPa.

The StoTherm Masonry Insulation System must only be applied on vertical surfaces except for sills, concrete reinforced parapets and concrete reinforced balustrades which must have a minimum 10┬░ slope and be waterproofed in accordance with the requirements of the Technical Literature and building designer.

The StoTherm Masonry Insulation System for use on buildings within the scope detailed in Appraisal Paragraph 2.1 is appraised for use with aluminium window and door joinery that is installed with vertical jambs and horizontal heads and sills. (The Appraisal of the StoTherm Masonry Insulation System relies on the joinery meeting the requirements of NZS 4211 for the relevant Wind Zone.)

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 251KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

StoTherm Masonry Insulation System

This document is not CITED BY any other resources:

StoTherm Masonry Insulation System

Description

The StoTherm Masonry Insulation System is an exterior insulating and finishing system for concrete masonry, in-situ or pre-cast concrete walls.

The system consists of expanded polystyrene (EPS) StoTherm Panels fixed to the concrete masonry or concrete wall with adhesive mortar and mechanical anchors. The plaster system consists of an 8 - 12 mm thickness of fibreglass mesh reinforced synthetic resin plasters and synthetic resin finishing plasters applied to the StoTherm Panels. The plaster system is finished with a 100% acrylic exterior paint system. The top coat plasters can be textured to give different finished appearances.

View on Information Provider website Download this resource (PDF, 251KB)
StoTherm Masonry Insulation System
Description

The StoTherm Masonry Insulation System is an exterior insulating and finishing system for concrete masonry, in-situ or pre-cast concrete walls.

The system consists of expanded polystyrene (EPS) StoTherm Panels fixed to the concrete masonry or concrete wall with adhesive mortar and mechanical anchors. The plaster system consists of an 8 - 12 mm thickness of fibreglass mesh reinforced synthetic resin plasters and synthetic resin finishing plasters applied to the StoTherm Panels. The plaster system is finished with a 100% acrylic exterior paint system. The top coat plasters can be textured to give different finished appearances.

View on Information Provider website Download this resource (PDF, 251KB)
This resource does not cite any other resources.

StoTherm Masonry Insulation System

This resource does not CITE any other resources.
Save
Feedback