IEC 61249-4-5:2005 Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability

Abbreviation
IEC 61249-4-5:2005
Valid from
5/09/2005

Information provider
International Electrotechnical Commission,
Author
International Electrotechnical Commission
Information type
IEC Standard,
Format
PDF, HARD COPY,


Description

This part of IEC 61249 gives requirements for properties of prepreg that is mainly intended to be used as bonding sheets in connection with laminates according to IEC 61249-2-8 when manufacturing multilayer boards according to IEC 62326-4. This material may be also used to bond other types of laminates. Prepreg according to this standard is of defined flammability (vertical burning test).

The flammability rating on fully cured prepreg is achieved through the use of brominated fire retardants contained as an integral part of the polymeric structure. After curing of the prepreg according to the supplier's instructions, the glass transition temperature is defined as 150°C minimum.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

IEC 61249-4-5:2005 Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability

This document is CITED BY:

IEC 61249-4-5:2005 Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability

Description

This part of IEC 61249 gives requirements for properties of prepreg that is mainly intended to be used as bonding sheets in connection with laminates according to IEC 61249-2-8 when manufacturing multilayer boards according to IEC 62326-4. This material may be also used to bond other types of laminates. Prepreg according to this standard is of defined flammability (vertical burning test).

The flammability rating on fully cured prepreg is achieved through the use of brominated fire retardants contained as an integral part of the polymeric structure. After curing of the prepreg according to the supplier's instructions, the glass transition temperature is defined as 150°C minimum.

View on Information Provider website
IEC 61249-4-5:2005 Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability
Description

This part of IEC 61249 gives requirements for properties of prepreg that is mainly intended to be used as bonding sheets in connection with laminates according to IEC 61249-2-8 when manufacturing multilayer boards according to IEC 62326-4. This material may be also used to bond other types of laminates. Prepreg according to this standard is of defined flammability (vertical burning test).

The flammability rating on fully cured prepreg is achieved through the use of brominated fire retardants contained as an integral part of the polymeric structure. After curing of the prepreg according to the supplier's instructions, the glass transition temperature is defined as 150°C minimum.

View on Information Provider website
This resource does not cite any other resources.

IEC 61249-4-5:2005 Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability

This resource does not CITE any other resources.
Feedback