IBS RigidRAP®-XT

Abbreviation
CM70091 Rev 1
Version
Revision 1
Valid from
22/06/2022

Information provider
Ministry of Business, Innovation and Employment,
Author
Bureau Veritas Australia Pty Ltd
Information type
Product Certificate (CodeMark),
Format
PDF,

Description

IBS RigidRAP®-XT is an 8mm OSB panel product faced with a laminated synthetic building wrap and with 10mm lightweight rigid foam on the rear of the panel.

IBS RigidRAP®-XT is a rigid air barrier and bracing element, and provides temporary protection from the weather during construction. It contributes thermal resistance to the wall and incorporates a thermal break for use with light steel framing. It is suitable for use on new and existing steel framed or timber framed buildings founded on either a concrete floor slab or timber subfloor. When all joints are sealed with a flashing tape, no flexible wall underlay is required.

Scope

1. IBS RigidRAP®-XT is certified for use with buildings:

  • a) designed and constructed to:
    • i) NASH Standard Part Two and located in wind zones up to and including Extra High (as defined in NASH Standard Part Two:), or
    • ii) NZS3404 and AS/NZS 1170 with a maximum wind design pressure (ULS) of 2.5 kPa, or
    • iii) NZ3604:2011 and located in wind zones up to and including Extra High (as defined in NZS3604 ) or
    • iv) NZS3603:1993 and AS/NZS 1170 with a maximum wind design pressure (ULS) of
      2.5 kPa or
    • v) in existing buildings where the specifier and installer have assured themselves that the existing structure is adequate for the intended use; and
  • b) where the cladding system incorporates a ventilated cavity and wall cladding that complies with Acceptable Solutions E2/AS1 or, E2/AS4 or is covered by a current and relevant Product Certificate (CodeMark).

2. IBS RigidRAP®-XT shall:

  • a) be installed in accordance with the manufacturer's installation guide IBS RigidRAP®-XT Installation Guide (May 2022) for steel framing or IBS RigidRAP® Installation Guide, May 2022 for timber framing, (and only with the flashing tapes specified in the installation guide), and
  • b) not be exposed to the weather or ultraviolet light for more than 90 days during construction.
For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 732KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

IBS RigidRAP®-XT

This document is not CITED BY any other resources:

IBS RigidRAP®-XT

Description

IBS RigidRAP®-XT is an 8mm OSB panel product faced with a laminated synthetic building wrap and with 10mm lightweight rigid foam on the rear of the panel.

IBS RigidRAP®-XT is a rigid air barrier and bracing element, and provides temporary protection from the weather during construction. It contributes thermal resistance to the wall and incorporates a thermal break for use with light steel framing. It is suitable for use on new and existing steel framed or timber framed buildings founded on either a concrete floor slab or timber subfloor. When all joints are sealed with a flashing tape, no flexible wall underlay is required.

View on Information Provider website Download this resource (PDF, 732KB)
IBS RigidRAP®-XT
Description

IBS RigidRAP®-XT is an 8mm OSB panel product faced with a laminated synthetic building wrap and with 10mm lightweight rigid foam on the rear of the panel.

IBS RigidRAP®-XT is a rigid air barrier and bracing element, and provides temporary protection from the weather during construction. It contributes thermal resistance to the wall and incorporates a thermal break for use with light steel framing. It is suitable for use on new and existing steel framed or timber framed buildings founded on either a concrete floor slab or timber subfloor. When all joints are sealed with a flashing tape, no flexible wall underlay is required.

View on Information Provider website Download this resource (PDF, 732KB)
This resource does not cite any other resources.

IBS RigidRAP®-XT

This resource does not CITE any other resources.
Feedback