Table of Contents

Section 1 General

1.1 Scope And Application

1.2 Referenced Documents

1.3 Definitions

1.4 Fundamental Principles

1.5 Marking

1.6 Maintenance

Section 2 Safety

2.1 Protection Against Electric Shock

2.2 Protection Against Thermal Effects In Normal Service

2.3 Flammable And Explosive Conditions

Section 3 Design, Construction And Installation

3.1 General

3.2 Installation Of Type I Systems And Erection Of Type Ii Systems

3.3 Requirements For Transformers, Inverters, Convertors And Ballasts

3.4 Open-Circuit protective devices

3.5 Protection Against Ingress Of Water And Access To Hazardous Parts

3.6 Isolating Switch

3.7 Temperature Rating Of Components

Section 4 Wiring

4.1 General

4.2 Insulated Cables

4.3 Distance Between Supports Of Insulated Cables

4.4 Separation From Adjacent Metal

4.5 Bare Conductors Or Cables Not Complying With As/NZS 3166

4.6 Tubulation

4.7 Segregation Of Circuits

4.8 Earthing

4.9 Earthing Not Required

4.10 Entry Of Cables

4.11 Cord Anchorage

Section 5 Cold-Cathode Tubes

5.1 Supports For Cold-Cathode Tubes

5.2 Clearance From Material

5.3 Entry Of Tubes Into Enclosures

Section 6 Inspection And Testing

6.1 Inspection And Testing Of Type I Systems

6.2 Inspection And Testing Of Type Ii Systems

Appendices

Appendix A - Illustration Of The Definition Of Arm's Reach

Appendix B - Illustration Of Metal Not Required To Be Earthed

Appendix C - Typical Syllabus Of A Training Course For Competent Persons

Appendix D - Typical Statement Of Conformity

Appendix E - Dangerous Voltage Symbol 417-Iec-5036-50 In Accordance With As 1104

Appendix F - Maintenance Guide

Appendix G - Cold-Cathode System Circuits

Appendix H - Method Of Making Twisted Connections

Appendix I - Examples Of Tube Connections

Appendix J - Methods Of Testing Transformer Loading

Appendix K - Brief Description Of IP Ratings