Jenkin A-Lign® Vertical Shiplap Weatherboard Cavity Solution

Abbreviation
Appraisal number 929
Valid from
12/04/2017

Information provider
BRANZ Limited
Information type
BRANZ Appraisal
Format
PDF

Description

Jenkin A-Lign® Vertical Shiplap Weatherboard Cavity Solution is a cavity-based chiplap weatherboard external wall cladding solution for residential and light commercial type buildings where domestic construction techniques are used.

The solution consists of vertically fixed Claymark Limited shiplap timber weatherboards, ventillated cavity battens, flashings and accessories and is finished with  a minimum two coats of 100% premium acrylic house paint.

The solution incorporates a primary and secondary means of weather resistance (first and second line of defence) against water penetration by separating the cladding from the external wall frame with a nominal 20 mm drained cavity.

Scope

The Jenkin A-Lign® Vertical Shiplap Weatherboard Cavity Solution has been appraised as an external vertically fixed wall cladding solution for buildings within the following scope:

  • constructed with timber framing in accordance with the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1; and,
  • constructed with steel framing subject to specific engineerig design with building height and floor plan area scope limitation in accordance with NZBC Acceptable Solution E2/AS1; and,
  • with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1, Table 2; and,
  • situated in NZS 3604 Building Wind Zones up to, and including Extra High'.

The Jenkin A-Lign® Vertical Shiplap Weatherboard Cavity Solution has also been appraised as an external vertically fixed wall cladding solution for buildings within the following scope:

  • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 with regards to building height and floor plan area; and,
  • constructed with steel framing subject to specific engineering design; and,
  • situated in specific design wind pressures up to a maximum design differential ultimate limit state (ULS) of 2.5 kPa.

The Jenkin A-Lign® Vertical Shiplap Weatherboard Cavity Solution must only be installed vertically on vertical flat surfaces.

The Jenkin A-Lign® Vertical Shiplap Weatherboard Cavity Solution is appraised for use with aluminium and timber window and door joinery that is installed with vertical jambs and horizontal heads and sills. (The Appraisal of the Jenkin A-Lign® Vertical Shiplap Weatherboard Cavity Solution relies on the joinery meeting the requirements of NZS 4211 for the relevant Wind Zone or wind pressure and the timber joinery profiles meeting the requirements of NZS 3610.)

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 601KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

Jenkin A-Lign® Vertical Shiplap Weatherboard Cavity Solution

This document is not CITED BY any other resources:

Jenkin A-Lign® Vertical Shiplap Weatherboard Cavity Solution

Description

Jenkin A-Lign® Vertical Shiplap Weatherboard Cavity Solution is a cavity-based chiplap weatherboard external wall cladding solution for residential and light commercial type buildings where domestic construction techniques are used.

The solution consists of vertically fixed Claymark Limited shiplap timber weatherboards, ventillated cavity battens, flashings and accessories and is finished with  a minimum two coats of 100% premium acrylic house paint.

The solution incorporates a primary and secondary means of weather resistance (first and second line of defence) against water penetration by separating the cladding from the external wall frame with a nominal 20 mm drained cavity.

View on Information Provider website Download this resource (PDF, 601KB)
Jenkin A-Lign® Vertical Shiplap Weatherboard Cavity Solution
Description

Jenkin A-Lign® Vertical Shiplap Weatherboard Cavity Solution is a cavity-based chiplap weatherboard external wall cladding solution for residential and light commercial type buildings where domestic construction techniques are used.

The solution consists of vertically fixed Claymark Limited shiplap timber weatherboards, ventillated cavity battens, flashings and accessories and is finished with  a minimum two coats of 100% premium acrylic house paint.

The solution incorporates a primary and secondary means of weather resistance (first and second line of defence) against water penetration by separating the cladding from the external wall frame with a nominal 20 mm drained cavity.

View on Information Provider website Download this resource (PDF, 601KB)
This resource does not cite any other resources.

Jenkin A-Lign® Vertical Shiplap Weatherboard Cavity Solution

This resource does not CITE any other resources.
Feedback