ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid

Abbreviation
ISO 3651-2:1998
Valid from
14/05/1998

Information provider
Standards New Zealand,
Author
International Organisation for Standardization
Information type
ISO Standard,
Format
PDF, HARD COPY,


Description

This part of ISO 3651 specifies methods for the determination of the resistance to intergranular corrosion of ferritic, austenitic and ferritic-austenitic (duplex) stainless steels in media containing sulfuric acid. It also specifies the purposes which may be assigned to the test. The test methods included are:

  • method A: the 16 % sulfuric acid/copper sulfate test (Monypenny Strauss test);
  • method B: the 35 % sulfuric acid/copper sulfate test;
  • method C: the 40 % sulfuric acid/ferric sulfate test.

The methods are applicable to stainless steels supplied in the form of cast, rolled or forged products and tubes and intended for use in a mildly oxidizing acid medium (for example, sulfuric acid, phosphoric acid).

Unless specified in the product standard, the method to be used, A, B or C, shall form the subject of an agreement between the interested parties.

Annex A gives examples of application of the three methods on stainless steels.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid

This document is CITED BY:

ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid

Description

This part of ISO 3651 specifies methods for the determination of the resistance to intergranular corrosion of ferritic, austenitic and ferritic-austenitic (duplex) stainless steels in media containing sulfuric acid. It also specifies the purposes which may be assigned to the test. The test methods included are:

  • method A: the 16 % sulfuric acid/copper sulfate test (Monypenny Strauss test);
  • method B: the 35 % sulfuric acid/copper sulfate test;
  • method C: the 40 % sulfuric acid/ferric sulfate test.

The methods are applicable to stainless steels supplied in the form of cast, rolled or forged products and tubes and intended for use in a mildly oxidizing acid medium (for example, sulfuric acid, phosphoric acid).

Unless specified in the product standard, the method to be used, A, B or C, shall form the subject of an agreement between the interested parties.

Annex A gives examples of application of the three methods on stainless steels.

View on Information Provider website
ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid
Description

This part of ISO 3651 specifies methods for the determination of the resistance to intergranular corrosion of ferritic, austenitic and ferritic-austenitic (duplex) stainless steels in media containing sulfuric acid. It also specifies the purposes which may be assigned to the test. The test methods included are:

  • method A: the 16 % sulfuric acid/copper sulfate test (Monypenny Strauss test);
  • method B: the 35 % sulfuric acid/copper sulfate test;
  • method C: the 40 % sulfuric acid/ferric sulfate test.

The methods are applicable to stainless steels supplied in the form of cast, rolled or forged products and tubes and intended for use in a mildly oxidizing acid medium (for example, sulfuric acid, phosphoric acid).

Unless specified in the product standard, the method to be used, A, B or C, shall form the subject of an agreement between the interested parties.

Annex A gives examples of application of the three methods on stainless steels.

View on Information Provider website
This resource does not cite any other resources.

ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid

This resource does not CITE any other resources.
Feedback