Save

ISO 228-2:1987 Pipe threads where pressure-tight joints are not made on the threads -- Part 2: Verification by means of limit gauges

Abbreviation
ISO 228-2:1987
Valid from
20/08/1987

Information provider
International Organisation for Standardization
Author
International Organization for Standardization
Information type
ISO Standard
Format
PDF


Description

This part of ISO 228 specifies the verification, by means of limit gauges, of cylindrical threads, the dimensions and tolerances of which are given in ISO 228-1.\
For industrial applications (see for example ISO 1179), it may be necessary to carry out additional checks.
Since this 55° profile has different elements to be verified, it is necessary to provide for several GO and several NOT GO gauges:
  • a) the threaded GO gauges (see clauses 6 and 7) shall ensure that the profile of the machined piece does not exceed the maximum of material provided for by the tolerances applied to the dimensions of the profile defined by ISO 228-1;
  • b) the threaded NOT GO gauges for the threads of the pieces (see clauses 6 and 7) fix the minimum material limit on the flanks of the thread.

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is cited by:

ISO 228-2:1987 Pipe threads where pressure-tight joints are not made on the threads -- Part 2: Verification by means of limit gauges

This document is CITED BY:

ISO 228-2:1987 Pipe threads where pressure-tight joints are not made on the threads -- Part 2: Verification by means of limit gauges

Description

This part of ISO 228 specifies the verification, by means of limit gauges, of cylindrical threads, the dimensions and tolerances of which are given in ISO 228-1.\
For industrial applications (see for example ISO 1179), it may be necessary to carry out additional checks.
Since this 55° profile has different elements to be verified, it is necessary to provide for several GO and several NOT GO gauges:
  • a) the threaded GO gauges (see clauses 6 and 7) shall ensure that the profile of the machined piece does not exceed the maximum of material provided for by the tolerances applied to the dimensions of the profile defined by ISO 228-1;
  • b) the threaded NOT GO gauges for the threads of the pieces (see clauses 6 and 7) fix the minimum material limit on the flanks of the thread.

View on Information Provider website
ISO 228-2:1987 Pipe threads where pressure-tight joints are not made on the threads -- Part 2: Verification by means of limit gauges
Description
This part of ISO 228 specifies the verification, by means of limit gauges, of cylindrical threads, the dimensions and tolerances of which are given in ISO 228-1.\
For industrial applications (see for example ISO 1179), it may be necessary to carry out additional checks.
Since this 55° profile has different elements to be verified, it is necessary to provide for several GO and several NOT GO gauges:
  • a) the threaded GO gauges (see clauses 6 and 7) shall ensure that the profile of the machined piece does not exceed the maximum of material provided for by the tolerances applied to the dimensions of the profile defined by ISO 228-1;
  • b) the threaded NOT GO gauges for the threads of the pieces (see clauses 6 and 7) fix the minimum material limit on the flanks of the thread.
View on Information Provider website
This resource does not cite any other resources.

ISO 228-2:1987 Pipe threads where pressure-tight joints are not made on the threads -- Part 2: Verification by means of limit gauges

This resource does not CITE any other resources.
Save
Feedback