IEC 60584-2:1982 Thermocouples. Part 2: Tolerances

Abbreviation
IEC 60584-2:1982
Valid from
1/01/1982

Information provider
International Electrotechnical Commission
Author
International Electrotechnical Commission
Information type
IEC Standard
Format
PDF, HARD COPY

Description

Contains the manufacturing tolerances for both noble and base metal thermocouples manufactured in accordance with e.m.f. temperature relationships of Part 1 of the standard. The tolerance values are for a thermocouple manufactured from wires normally in the diameter range 0.25 mm to 3 mm, as delivered to the user and do not allow for calibration draft during use.

 

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

IEC 60584-2:1982 Thermocouples. Part 2: Tolerances

This document is not CITED BY any other resources:

IEC 60584-2:1982 Thermocouples. Part 2: Tolerances

Description

Contains the manufacturing tolerances for both noble and base metal thermocouples manufactured in accordance with e.m.f. temperature relationships of Part 1 of the standard. The tolerance values are for a thermocouple manufactured from wires normally in the diameter range 0.25 mm to 3 mm, as delivered to the user and do not allow for calibration draft during use.

 

View on Information Provider website
IEC 60584-2:1982 Thermocouples. Part 2: Tolerances
Description
Contains the manufacturing tolerances for both noble and base metal thermocouples manufactured in accordance with e.m.f. temperature relationships of Part 1 of the standard. The tolerance values are for a thermocouple manufactured from wires normally in the diameter range 0.25 mm to 3 mm, as delivered to the user and do not allow for calibration draft during use.

 

View on Information Provider website
This resource does not cite any other resources.

IEC 60584-2:1982 Thermocouples. Part 2: Tolerances

This resource does not CITE any other resources.
Feedback