Save

VertiClad Cladding System

Abbreviation
GM-CM30084
Version
Rev D1 - 02/03/2020
Valid from
26/10/2017

Information provider
Ministry of Business, Innovation and Employment
Author
Global-Mark
Information type
Product Certificate (CodeMark)
Format
PDF

Description

The VertiClad Cladding System (the System) is a cavity-based external wall cladding system installed on a structural timber frame.

The system comprises: vertically fixed weatherboards with the species selected from; Western Red Cedar (Thuja Plicata), Alaskan Yellow Cedar (Cupressus nootkatensis), Radiata Pine – H3.2 (MicroPro® treated), Iroko (Milicia excelsa) and installed over H3.2 treated timber castellated cavity battens to form a nominally non-structural 20 mm cavity or structurally fixed 45 mm cavity; flashings and accessories.

The weatherboards are profiled to JSC’s specifications and to NZS 3617:1979 and BRANZ BU411(2001) and are supplied with a minimum of a single coating of primer or stain to all four sides. Once installed top coats must be applied according to the coating manufacturers specifications.

Scope

The scope of certification covers the use of the system as an external cladding within the following scope:

1: Location

  • In wind zones up to and including extra high, as defined in NZS3604:2011 or situated in specific design wind pressures up to a maximum design differential ultimate limit state (ULS) of 2.5 kPa, where the building has been specifically engineered
  • In all corrosion zones, subject to use of fixing material as prescribed in NZS3604:2011

2. Building

  • Has the scope limitations of NZBC Acceptable System E2/AS1, Third Edition including amendment 7 (01/01/2017), Paragraph 1.1; and,
  • New timber framed buildings with building wrap or rigid air barrier that comply with the NZ Building Code
  • Existing timber framed buildings where the designer and installer have satisfied themselves that the existing building is suitable for the intended building work
  • With a risk score of 0-20 when calculated in accordance with NZBC Acceptable Solution E2/AS1, Third Edition including amendment 7 (01/01/2017), Table 2
  • The System must only be installed vertically on vertical, flat, surfaces
  • The System is certified for use with aluminium window and door joinery that is installed with vertical jambs and horizontal heads and sills
  • Located more than 1m from the relevant boundaries.

 

 

For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 420KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

VertiClad Cladding System

This document is not CITED BY any other resources:

VertiClad Cladding System

Description

The VertiClad Cladding System (the System) is a cavity-based external wall cladding system installed on a structural timber frame.

The system comprises: vertically fixed weatherboards with the species selected from; Western Red Cedar (Thuja Plicata), Alaskan Yellow Cedar (Cupressus nootkatensis), Radiata Pine – H3.2 (MicroPro® treated), Iroko (Milicia excelsa) and installed over H3.2 treated timber castellated cavity battens to form a nominally non-structural 20 mm cavity or structurally fixed 45 mm cavity; flashings and accessories.

The weatherboards are profiled to JSC’s specifications and to NZS 3617:1979 and BRANZ BU411(2001) and are supplied with a minimum of a single coating of primer or stain to all four sides. Once installed top coats must be applied according to the coating manufacturers specifications.

View on Information Provider website Download this resource (PDF, 420KB)
VertiClad Cladding System
Description

The VertiClad Cladding System (the System) is a cavity-based external wall cladding system installed on a structural timber frame.

The system comprises: vertically fixed weatherboards with the species selected from; Western Red Cedar (Thuja Plicata), Alaskan Yellow Cedar (Cupressus nootkatensis), Radiata Pine – H3.2 (MicroPro® treated), Iroko (Milicia excelsa) and installed over H3.2 treated timber castellated cavity battens to form a nominally non-structural 20 mm cavity or structurally fixed 45 mm cavity; flashings and accessories.

The weatherboards are profiled to JSC’s specifications and to NZS 3617:1979 and BRANZ BU411(2001) and are supplied with a minimum of a single coating of primer or stain to all four sides. Once installed top coats must be applied according to the coating manufacturers specifications.

View on Information Provider website Download this resource (PDF, 420KB)
This resource does not cite any other resources.

VertiClad Cladding System

This resource does not CITE any other resources.
Save
Feedback