Save

Viking Bituclad Waterproofing Membranes

Abbreviation
GM-CM30053-RevB
Version
RevB
Valid from
19/11/2014

Information provider
Ministry of Business, Innovation and Employment
Author
Global-Mark Pty Ltd
Information type
Product Certificate (CodeMark)
Format
PDF

Description

Viking Bituclad Waterproofing Membranes are a range of torchapplied reinforced modified-bitumen membranes for use as fully bonded double-layer roof waterproofing membranes on nominally flat and pitched roofs.

There are two types of systems: SBS and APP.

Each system is comprised of a first 3mm thick modified bitumen layer, torch applied sheet waterproofing membrane with a sand surface which is used as the base layer and a second 4mm thick modified bitumen layer, torch applied sheet waterproofing membrane with an upper layer of mineral chip. This second layer is referred to as a cap sheet. 

  • The SBS system details are: Bituclad base sheet SEM527 & either Bituclad Mineral Sheet SEM549 or Bituclad Mineral Sheet SEM550
  • The APP system details are: Bituclad base sheet SEM427 & either Bituclad Mineral Sheet SEM445 or Bituclad Mineral Sheet SEM449

Scope

Viking Bituclad Waterproofing Membranes have been assessed as roof waterproofing membranes on buildings within the following scope:

  • the scope limitations of NZS 3604:2011 and NZBC Acceptable Solution E2/AS1, Paragraph1.1;
  • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 with regards to building height and floor plan area when subject to specific structural design;
  • situated in NZS 3604:2011 Wind Zones, up to, and including Extra High;
  • with substrates of plywood or suspended concrete slab;
  • with a minimum fall for roofs of 1:30 (2 degrees).

 

Viking Bituclad Waterproofing Membranes have also been assessed for use as roof waterproofing membranes on buildings within the following scope:

  • subject to specific structural and weathertightness design situated in wind pressures up to a maximum design differential ultimate limit state (ULS) of 6 kPa; and,
  • with substrates of plywood or suspended concrete slab.
For assistance with locating previous versions, please contact the information provider.
View on Information Provider website Download this resource (PDF, 357KB)
For assistance with locating previous versions, please contact the information provider.
This resource is not cited by any other resources.

Viking Bituclad Waterproofing Membranes

This document is not CITED BY any other resources:

Viking Bituclad Waterproofing Membranes

Description

Viking Bituclad Waterproofing Membranes are a range of torchapplied reinforced modified-bitumen membranes for use as fully bonded double-layer roof waterproofing membranes on nominally flat and pitched roofs.

There are two types of systems: SBS and APP.

Each system is comprised of a first 3mm thick modified bitumen layer, torch applied sheet waterproofing membrane with a sand surface which is used as the base layer and a second 4mm thick modified bitumen layer, torch applied sheet waterproofing membrane with an upper layer of mineral chip. This second layer is referred to as a cap sheet. 

  • The SBS system details are: Bituclad base sheet SEM527 & either Bituclad Mineral Sheet SEM549 or Bituclad Mineral Sheet SEM550
  • The APP system details are: Bituclad base sheet SEM427 & either Bituclad Mineral Sheet SEM445 or Bituclad Mineral Sheet SEM449

View on Information Provider website Download this resource (PDF, 357KB)
Viking Bituclad Waterproofing Membranes
Description

Viking Bituclad Waterproofing Membranes are a range of torchapplied reinforced modified-bitumen membranes for use as fully bonded double-layer roof waterproofing membranes on nominally flat and pitched roofs.

There are two types of systems: SBS and APP.

Each system is comprised of a first 3mm thick modified bitumen layer, torch applied sheet waterproofing membrane with a sand surface which is used as the base layer and a second 4mm thick modified bitumen layer, torch applied sheet waterproofing membrane with an upper layer of mineral chip. This second layer is referred to as a cap sheet. 

  • The SBS system details are: Bituclad base sheet SEM527 & either Bituclad Mineral Sheet SEM549 or Bituclad Mineral Sheet SEM550
  • The APP system details are: Bituclad base sheet SEM427 & either Bituclad Mineral Sheet SEM445 or Bituclad Mineral Sheet SEM449
View on Information Provider website Download this resource (PDF, 357KB)
This resource does not cite any other resources.

Viking Bituclad Waterproofing Membranes

This resource does not CITE any other resources.
Save
Feedback